Category: Ergs

Ergs Novice Q&A

Question of the Day

Hiya, I just started rowing recently and have to do some ergs with 18, 20 & 22 m/s but I don’t quite understand how this works. Does it really just depend on my speed or do I also have to change the resistance level to get those results?

I think you mean “strokes per minute” (SPM), not m/s, which is “meters per second”. The resistance has nothing to do with stroke rates, distance covered, etc. It’s essentially like the gears on a bike – higher damper settings require you to work harder to spin the fan on the next stroke whereas lower settings require less work to spin it. It affects how erging feels more than it affects the resistance you’re working against. The dampers are usually set at 4 or 5 so I would leave it there.

Ergs Q&A Training & Nutrition

Question of the Day

I am doing an 8k sometime this week. I’ve done a 30′ piece before, and I’ve done a few 4k but nothing like this. My split for the 30 minute piece was 2:05.8 but that barely got me into the top 16. I’ve improved a small bit since then but not much. Recently I’ve been making top 3-5 on our erg pieces and I really want to make the first boat, however I know about 3k into it, I’m going to be telling myself I really don’t care and it’s not worth it. How can I approach this physically and mentally?

Have a plan. Break the piece down into whatever size chunks you want (8x1k, 4x2k, etc.) and plot out roughly what splits you want to shoot for during each chunk. Be reasonable and realistic with these. It’s better to say your goal is a 2:05 split and then actually be at 2:04.6 instead of shooting for 2:03 and then being above for the majority of the piece.

Related: On a lot of rowing blogs I hear people mention “negative splits”, especially when discussing 2k’s. What exactly are they and can it be beneficial to know how to properly use them?

Mentally, think about this. You said you want to make the first boat but you also said that 3k in you’re going to be saying you don’t care and it’s not worth it. I think all rowers question whether or not it’s worth it while they’re in the pain cave but deep down they know it is otherwise they wouldn’t have started the piece in the first place. No one that’s truly serious about the sport or making the top boat would say to themselves that they just don’t care in the middle of the piece though, no matter how arduous it is. If making that top boat is your goal then putting yourself through 8000m of pain is worth it by default.

Pushing yourself for that long is going to test your endurance, it’s going to hurt, and at some point you are going to want to quit. What makes you a stronger, more resilient athlete isn’t pulling the fastest splits or coming in first, it’s pushing through the pain and finishing the piece regardless of what happens in the middle. As a coxswain (and a coach) I obviously want fast people in my boats but even more so than that, I want people who know what pain feels like and who know how to overcome it.

Ergs Q&A Training & Nutrition

Question of the Day

Hi. As fall season is coming up, one of my rowers is getting ready for 6K testing and prepping for them. After a summer break, he’s feeling a little out of it and he really needs to work on stamina. I was wondering if there are any pieces on the ergs that could help him with that because I’m low on ideas. Thank you!

Steady state, steady state, and more steady state.

I scribbled this down sometime last fall from something I read online (and of course now I don’t remember where I read it). It’s basically what a week of workouts in the mid to late summer looks like knowing you’ve got a 5k or a 6k coming up once fall season finally rolls around. All the interval stuff should be done at your at or around your goal pace and your steady state pace should be 6k+12ish.

Monday: 5x1500m, 5 minutes rest in between
Tuesday: 10k SS at 18-22spm
Wednesday: 2x6k, 3 minutes rest
Thursday: 12k SS at 18-22spm
Friday: 4x2k, 5 minutes rest
Saturday: 10k SS at 18-22spm
Sunday: Off

Essentially what you want to do is do 2-3 days of intervals and 2-3 days of long steady state. Other intervals I’ve seen are 8x1k 4x2k, 4×10 minutes with 4-3-2-1 minute rate changes and 5 minutes rest between pieces, 4×15 minutes with 3 minutes rest, 3×20 minutes with 4 minutes rest…it goes on and on.

Make sure you’re not forgetting to do core, some kind of lifting, and lots of stretching and rolling out. Doing all the work on the erg isn’t going to do you any good if you forget to do the other stuff too.

College Ergs Q&A Recruiting Rowing

Question of the Day

Hey so following that junior girl, I’m going into junior year as well, I’m 5’9″ and on the lower side of lightweight. I pull an 8:00 2k, and I know that’s not low enough but do you think I may have a chance at recruitment? There’s only so many lightweight options and I’m not at that level, so I need a compromise. Tips for really getting that time down in the next year?

D1 programs tend to look for 2ks around 7:40-7:45ish as a starting point. As a junior, you’ve definitely got time to shave some seconds off your current 2k, it’s just going to be a matter of putting in the meters to get it done – basically it comes down to steady state, steady state, and more steady state. Build up your strength and endurance too – try to incorporate some lifting into your routine over the summer, as well as some cardio (running, biking, or swimming are great options).

I’m not sure if this is a misconception or just something that people don’t know but you don’t have to be recruited to row on the team in college. You could just email the coach up and say “hey, I was accepted into the Class of 2017, I rowed for four years in high school, and I’m interested in walking on to the team.” If you’re not sure your times are good enough to be recruited or after talking to coaches you don’t get any offers, you should consider this route.

To be honest, if you’re on the low side of lightweight (I’m assuming around 115-120lbs?) you’ll probably get more requests to cox rather than row, even though you’re tall. Height isn’t as much a big deal for coxswains as weight is, so even though the majority of us are vertically challenged there have been known to be a few tall coxswains. Your height is great for a rower but being 20+ pounds lighter than the other openweights can make it hard for you to actually be competitive with them, which is probably what coaches will point out.

Coxing Ergs Q&A

Question of the Day

What’s a good split for an average coxswain to have for 2k?

It’s been quite awhile since I last erged but I could probably hold a solid 2:15-2:20, so for a girl of around my height and weight (4’11”, 95lbs) with reasonable athletic ability I’d say anywhere from 2:10-2:30 would be good. If I pull my ass off I can go 1:55-2:00 for about 300m, so I tend to save that for the end. For a guy, that’s a little harder for me to guess for obvious reasons, but I’d say 1:40-2:00 would probably be reasonable.

Rowing Blisters 101

Ergs Novice Rowing Technique Training & Nutrition

Rowing Blisters 101

Blisters suck — this we can all agree on. What most rowers and coxswains don’t know are the specifics of how and why they form, how to treat them, and how to prevent them.

One of my former coaches used to tell us that there was nothing more character-building in rowing than the blisters you get. A lot of the time you’re encouraged to just deal with them because they’re inevitable but a point in time comes when you have to stop just dealing with it and start taking the proper steps to protect the ones you already have and prevent more from occurring. Do not be careless when it comes to your blisters. There are few things more eye-roll inducing than rowers (novices) who are like “look at my hands, they’re completely torn to shreds, clearly this makes me the most badass rower ever!” Just … no.

What are they and how do you get them?

There are two kinds of blisters – your regular, run of the mill blisters and blood blisters. Regular blisters are pockets of fluid in between the upper layers of your skin. They’re most often caused by friction, which in rowing could be from overuse, having too tight of a grip, etc. The other kind of blister is a blood blister. These kinds form when blood vessels near the surface of your skin are damaged but the skin itself isn’t broken. There are two main causes for blood blisters. One is consistently rubbing the skin back and forth on or against something. The other, and more common cause, is the skin being pinched together (say, for example, when you’re rowing and suddenly the boat goes offset to one side and you smash your pinky in between the oar handle and the gunnel).

Related: Are you only supposed to get blisters on your inside hand? I have one on my outside hand on my fingers which has never happened before. I also have a tendency to over grip and feather w/ my outside hand. Would that have anything to do with it?

To pop or not to pop

There’s a lot of opinions out there on what you should do if you get a blister. Pop it, leave it alone, drain it, rip the skin off, sob quietly in the corner of the boathouse because your significant other will never want to hold your hand ever again, etc. I’m firmly in the camp of “leave it alone” if and when possible. As long as the blister isn’t having any kind of impact on your rowing you should aim to just let it be so as to avoid getting an infection in the open wound. This is one of those moments where you need to know the difference between pain and discomfort. Don’t deliberately mess with the blister if you don’t have to. If you develop a blister that has filled with fluid and is painful or disrupting your rowing though, you’ll want to drain it.

How to drain and clean your blisters

Before you do anything, wash your hands. It’s probably going to hurt but you never know what microbial nuisances might be lurking on your skin. Antimicrobial soap + warm water + at least 30 seconds per hand = acceptable. When you clean your blisters, especially the really bloody ones, try to avoid using peroxide if possible. Betadine is a better antibacterial alternative because it’s not as harsh on your skin and doesn’t hurt nearly as bad as peroxide does. Peroxide gets the job done quite well and there’s even some cool (read: gross) foaming action that happens with the really bad blisters but that being said, it hurts like a bitch.

As a pre-step to draining the blister you need to sterilize the needle or pin you plan on using. Don’t skip this step. It takes like, two minutes to do. You can sterilize whatever you plan on using by running it over a flame until it’s red hot and then letting it soak in peroxide for a few minutes.

When you’re ready to drain the blister, you’ll want to drain it from the side, not the middle as I’ve tried to illustrate below. To avoid creating a hole that would allow the skin to be easily ripped off it’s often suggested that you poke it with the needle from the top edge near your fingers. Keep the needle as close to your skin as possible.

Once the blister starts releasing the fluid, try not to let it run all over your hands. At the same time you’re poking it with the needle, hold a cotton ball or tissue on the blister so that the fluid can be immediately soaked up. Press gently with the pad of your finger to get the liquid out. Make sure that you’re actually pressing in the direction of the hole you just made too and do this until the blister is completely flat.

Once you’ve got the blister(s) drained you should put some Neosporin on them but keep them uncovered to give them an opportunity to dry out. NewSkin is another option but that seems to be a fairly hit or miss choice with most rowers. Some swear by it, others hate it. One thing that I’ve heard of people doing is rubbing Neosporin on a piece of sewing thread, putting it on a needle, and pulling it through the blister. Usually this is done before draining it but I don’t see why it wouldn’t be effective post-draining too. Doing this allows the medicine to get inside the blister and helps to prevent infections.

I’ve also heard about rowers using tea bags to help dry out and harden the blisters (via the tannic acid) – has anyone tried this? What have your experiences been? Another option is filling a bowl with epsom salts and warm water and allowing the salts to dissolve before soaking your hands for 20-30 minutes. This will help to dry out the blisters and keep them clean. Conveniently this process also allows you the time to catch up on all those TV shows you never actually have time to watch.

Related: Do you know any secret remedies for blisters? It’s the first week of winter conditioning and after only two practices I have killer blisters on my hands and ankles that I never got last year until later, and not as bad. I’m wondering if I’m doing something wrong with my form or something, although I’m not quite sure that could be the problem.

How to protect your hands

If you’ve already got blisters the next step is learning how to protect them while you’re practicing. Tape, band-aids, etc. are going to be your best friends if – if – you use them properly. Before anyone suggests it let’s get this out of the way right now: gloves = NO. You can’t get a good grip on the oar (yes, even with golfer’s or batter’s gloves) and your hands sweat inside them so much that you end up with way more blisters than when you started. You’re going to be tempted to ask your coach or coxswain if you can wear gloves but I’m here to save you from that embarrassment. Just don’t do it.

If you have blisters on your fingers, I recommend the knuckle band-aids since their little wing-like things allow them to stay more securely on your fingers. An additional option on top of – not instead of – the band-aids is to get those rubber finger protectors and slide one of those on. The rowers I’ve seen do it say that it holds the band-aid in place better so they don’t have to worry about it sliding around. If for whatever reason the blister starts bleeding, by having it in the protector you’ll avoid getting blood, bacteria, and who knows what else on your handle (and transferring whatever is on your handle into your open wound).

The issue that most rowers have is taping up the blisters on your palms and right below your fingers. If you just wrap the tape in a circle, about 1/3 of the way through your warmup you’ll notice that it’s starting to bunch up and expose your blisters to the elements. My recommendation is to wrap your hands similarly to how boxers wrap theirs. Obviously the tape wouldn’t need to be nearly as thick and if the blisters are only at the top of your palms you don’t need to wrap all the way down to your wrists but having the tape secured around your fingers though will ensure that it stays in place and you won’t have to worry about it.

Below is a video that you can use for reference. The loop that goes around your thumb (or whatever finger you choose) is what really secures your tape in place.

If you have a lot of blisters, buy your own tape and band-aids. Your coxswain is not a walking first aid dispensary. Anything that’s waterproof and flexible will be good since it’ll move with you and not restrict your movement.

You should be changing your tape and band-aids before and after every practice too because a) you need to clean your hands and get all the grunge off of them and b) the tape is going to be disgusting, rolled up on itself, and not effective at protecting your skin anymore.

How to prevent blisters.

Getting blisters as a rower is inevitable — it’s going to happen. You can limit the severity of them though simply by rowing with proper technique. Understand the difference between “relaxed grip” and “no grip” — “loose” does not literally mean loose as in flimsy, it means a happy medium between a death grip and no grip.

Avoid the death grip on the handle and instead keep the hands relaxed. On the recovery you should be able to freely wiggle your fingers while still maintaining control of the handle. You’ll know if you’re doing the death grip if your forearms and wrists are really sore and you’ve got hands that like they were rubbed on a cheese grater for a few hours.

Keep the towels that you use to wipe down your boats, oars, etc. clean too. At the beginning of the year it’s worth having everyone on the team donate an old rag or two to the team to use that way you’ve got an abundant supply. Also make sure the oar handles are being cleaned regularly too, especially if you’ve bled on them or had blisters open up during practice.

Know when a blister has festered into something more serious – and then get your ass to a doctor

MRSA. Sepsis. Cellulitis. Leptospirosis.

All of these are some of the potential consequences of bacteria coming in contact with your open wounds. All have been suffered from by rowers at some point or another. A prominent case that I remember reading about three or four years ago was the death of Andy Holmes, a several-time Olympian and gold-medalist from the UK, who died of leptospirosis after coming in contact with contaminated water. This resulted in British Rowing posting a notice on it’s website to rowers to remind them that good hygiene and proper care of blisters and track bites are crucial steps in not developing an infection, especially one that elevates to the severity that Holmes’ did.

It’s important for you to pay attention to any changes in the blisters themselves, the skin around the blisters, and most importantly, your overall health. If something looks or feels “off” don’t just suck it up — go to your local 24-hour urgent care facility and get someone to look at you. I know I say this all the time but I really mean it every time I do … better safe than sorry. Know how to separate discomfort or soreness from rowing from the symptoms of something more severe. If something feels off, tell your parent(s), coach(es), sibling(s), teammate(s), etc. so that someone else can keep an eye on you.

I’ve known three different people, two rowers and one coxswain, who developed MRSA as a result of not taking proper care of their blisters. On a scale of one to ten, two were probably at about a “six” with regards to severity and the other was at least a “nine”. That person got really sick and was hospitalized for about a week. This isn’t just stuff we make up to scare you into taking proper care of yourself, which you should be doing already. It can and does happen. Be proactive so it doesn’t happen to you.

Below is a quick rundown of each of the infections I listed above, in addition to their signs and symptoms.

Methicillin-resistant staphylococcus aureus (MRSA)

MRSA is a strain of bacteria that causes infections in the body and tends to be resistant to most commonly used antibiotics. It’s transmitted either through touching someone who already has it on their skin or by touching something (for example, oar handles) that has the bacteria on it. Signs of an infection include the skin around the initial wound being red, swollen, warm to the touch, more painful than normal, and potentially contain pus. Typically skin infections that are related to MRSA are mistaken for spider bites since spider bites look similar. If the infection spreads to the respiratory system, you could develop pneumonia and experience shortness of breath, a fever, chills, or a cough that you don’t otherwise normally have. If you go to the doctor and are given antibiotics, pay attention and see if you are actually getting better. If the infection continues to get worse, you develop a fever or the fever you have gets worse, or there are no signs of improvement after three(ish) days, go back to the doctor.

Sepsis (blood poisoning)

When bacteria enters the blood it’s known as a condition called “bacteremia”. Since the blood is typically sterile, the presence of bacteria is considered abnormal. Previous infections in the body’s organs can spread and lead to sepsis, which itself is a secondary set of symptoms, but it can also occur from bacteria entering through an open wound and being transported throughout the blood. Typically you’ll develop a rapid heart rate, a fever, and extreme chills, in addition to a rash that can appear in the form of skin discoloration or small red dots clustered across the body. Joint pain, disorientation, nausea, decreased blood pressure, vomiting, and clammy skin are additional symptoms you might experience if the infection progresses. At it’s most severe, your blood pressure drops to dangerously low levels which prevents your organs from getting the proper amount of oxygenated blood, leading to septic shock, which can cause (multiple) organ failure and death.

Cellulitis

Cellulitis, which is an infection of the connective tissues, is caused when bacteria (typically staph or strep) enters the body through broken skin (cuts, burns, blisters, etc.) and as it progresses, spreads to the deeper tissues, blood, and/or lymph nodes. The infected area will be warm and tender to the touch, red, and swollen. If it’s progressed to the point where the lymphatic system is involved you may notice that your lymph nodes are swollen and that you have streaking on the skin as the infection travels through the body. If the infection enters the bloodstream you will also most likely develop a fever.

Leptospirosis

This is a common bacterial infection transmitted between animals and humans. Typically we don’t come in contact with too many animals while we’re rowing but we do come in contact with a lot of water that presumably many animals have urinated in (another reason to work on splashing…). When you’re rowing and water from backsplash gets on your hands, legs, etc. that bacteria can enter your system through any open track bites or blisters you might have. Leptospirosis is a two-phase disease that starts with flu-like symptoms (headache, chills, muscle soreness, etc.), jaundice, red eyes, etc. before appearing to resolve itself. There’s a brief period where the person displays no symptoms before the second phase begins. Once that happens you get knocked out with illnesses ranging from meningitis to kidney and liver disease to full on renal failure.

The great thing though is that all of these conditions are preventable by taking proper care of any open blisters, cuts, etc. you have. I hope this helps answer some of your questions on how to handle blisters. If you’ve got a foolproof method that you turn to in dealing with your blisters, please leave it in the comments!

Image via // @petereed

Ready all, row… is on Patreon! If you’d like to support me and what I’m doing with the blog,
click below to check out the campaign.

Ergs Q&A Rowing

Question of the Day

I’m so stressed out ALL the time, but when I get to crew, I feel like a massive weight has been lifted. I love it so much, when I’m not rowing, I feel like shit. But then 2k’s come around and it’s just paralyzing, I have no clue how to do a 2k, having come off of an injury and I don’t want to do poorly and I’m just scared?

Don’t be scared. Way easier said than done, I know, but honestly, that really does make it worse. Coming off an injury you’re not expected to pull some miraculous 2k that blows everyone’s minds. That’s what we tell ourselves we have to do but no one actually expects that of us. (And if you’re coach does, perhaps someone should direct him to the “priority” entry in the dictionary and remind him that this shouldn’t be one of them.) 2ks coming off an injury are just the same as any other 2k minus the goal of PR’ing (assuming that’s what you’re goal is each time you 2k). Just go out and do the best you can. As your injury heals more and you regain your strength, your 2ks will improve a lot.

Related: How do you fight off the stress of rowing? I can’t just stop because it helps me ease school stuff but at the same time it makes everything pile up and I can’t hold everything in anymore.

It’s literally seven and a half to eight minutes of your entire day. That’s something like 0.005%. Are you really going to let something that takes up that little amount of time screw with your head?

Related: 2k test strategy

Have a plan. Get on the erg, close your eyes, deep breath, strap in, deep breath again, remind yourself you can do this, and then go do it. You can think when you’re done.