Category: How To

How to Avoid Getting Sick

How To Teammates & Coaches Training & Nutrition

How to Avoid Getting Sick

By

Previously: Steer an eight/four || Call a pick drill and reverse pick drill

I’ve had a really bad cold for about two weeks now and while I didn’t get it at crew, it got me thinking about all the times I have gotten sick while participating in sports or marching band or other activities. It’s not fun and puts a wrench in training and rehearsals but 20/20 hindsight reminds me that it’s almost always preventable.

Clean the equipment

Common sense, right? After a rower ergs, the first thing they should do is clean if off – the tracks, the slide, the monitor, and most importantly, the handle. Most boathouses will have a bottle of antibacterial spray lying around for this exact purpose. The handle should be obvious why it needs to be cleaned, but you should also clean the rest of the erg because sweating, coughing, bleeding, hacking up a lung, etc. can all lead to bodily fluids being spewed all over the place.

Don’t forget about the oars either, especially if you bled on them. You can easily clean these off after practice using water and bleach.

Minimize high-fiving

After a hard work out or an erg test there’s usually some high fives going around and I’m all for it but in the winter, especially post-erg, I’m all about the air-five … followed up with a generous amount of hand sanitizer.

Wear the appropriate clothing

There were numerous times in high school where one of my parents would say “you are not leaving the house wearing that!” in response to me wearing shorts and a t-shirt in late fall to marching band rehearsals or leaving without a coat in the middle of January (while it was snowing) to head to the boathouse. I rolled my eyes every single time because I knew I was either going to be inside the majority of the time (crew) or I’d get hot while on the field (with band) and end up shedding the extra layers anyways but regardless of what activity you’re doing, whether you’ll be inside or out, you have to wear the right stuff if you want to avoid getting sick.

Related: What to wear

If you’re inside and you want to wear your uni while you erg or lift, go for it but make sure you’re wearing something over it so you don’t freeze when you leave. The guys I rowed with in college would frequently wear their unis, a hoodie, and nothing else when going to and from the weight room and if you know Syracuse weather, you know that’s a bold choice between November and March. Similarly, if you’re going for a run during practice, wear the right stuff so your body stays warm. You’re more likely to catch a cold from being indoors where germs can fester more easily but keeping your hands, ears, neck, feet, and extremities warm will go a long way in preventing you from picking something up while outdoors.

Stay at home if you’re sick

Seriously, if you’re sick just stay home. If you didn’t go to school that day or you went home early, definitely do not go to practice. If anything, stay home out of respect to your teammates. No one wants a walking cesspool of germs walking around coughing, sneezing, and hacking on everything. Literally no one will appreciate you “toughing it out” and coming to practice if they end up getting sick as a result. If your body is fighting a cold, do you really think it’s in any position to do a 2k or lift weights? It needs time to rest and ultimately it’s better to miss an erg test and make it up when you’re at 100% than to do it when you’re at 50% and potentially screw yourself.

If you miss a few days of practice from being sick, yea, it sucks but your teammates will appreciate you keeping your germs to yourself and just getting over whatever you’ve got. Stay home, catch up on Netflix, eat your chicken noodle soup, and get healthy before you return to practice. Also, go to the doctor. Don’t prolong your illness (and waste valuable time) by not going.

All of this is common sense but it’s easy to get caught up in the rigor of training and forget or ignore these little details. The more diligent you are tough about keeping the equipment clean and taking care of yourself, the better off you and your teammates will be.

Image via // @jdcsss

Coxing How To Q&A Rowing

Question of the Day

By

If the wind pushes the boat into the grassy reeds, how do you get out of it without being pulled out by a coach? Do you have the side that’s not stuck back? Thanks!

First things first is to tell your boat to be quiet. Everyone is going to have an opinion on the best way to get out of there and there’s a good chance that someone or everyone will be annoyed at the situation. It’s your job to tell them to listen to your instructions because the more at-attention they are, the faster and easier it’ll be for you to get out of there.

The biggest thing here is making sure your skeg doesn’t get broken or bent. If it’s shallow or the weather’s been bad lately (and there’s a lot of debris in the water), you’ll need to listen for any bumps or noises that indicate you might have hit a log. Sometimes they can get caught up in the reeds too which makes it hard to avoid them. Make sure you don’t push it straight down because it’ll just pop right back up and do more damage (possibly catching your fingers in between it and the skeg, which would probably result in some form of bloodshed). If you don’t here any bumps or anything but still find it hard to steer with the strings, you might have to stick your arm under the boat and pull off anything that’s gotten caught around the skeg and the rudder.

As far as actually getting out of the reeds, if you’ve been blown in from the port side, for example, would require some backing mainly from the port rowers. You can have the starboard side assist but it could be hard for them to row if their oar is in the reeds. As soon as rowers (starting from bow pair) start getting clear though, have them row.

To clear your the blades if you’re really stuck in there, I’d feather the blade and just hack back and forth a bit to cut the reeds down a little. I saw a crew do this at a regatta once on the way to the start line and they were out of there in about two minutes. Unless the wind is really bad and negating anything you try and do, I wouldn’t do more than arms and body rowing. This is to avoid swinging the boat to quickly and sharply, which could cause damage to it if you hit something under the surface.

I’d start out with 6 and stroke backing to get your bow pointed towards open water and then have bow and 3 row to swing the bow out. Once your bow pair or bow four are clear of any visible reeds, have them row full slide to get the rest of the boat free. Once you’re clear, quickly put your arm back in to pull off any lingering reeds on your skeg/rudder, get your point, and row on. I can’t count the number of times I’ve seen a crew get out of a situation like that only to sit idle once they’re clear and then get blown right back into the reeds. You have to get away from them if you want to avoid getting stuck again, so row up a few hundred meters to a spot where it’s clear and then stop if you need to.

Coxing How To Q&A

Question of the Day

By

I still have trouble judging distances [m] any tips?

I used to have trouble with that too. Practice and racing have been what’s helped me the most in gauging how far I am from something. Nearly every race I did in high school was on a buoyed course and the last 250m were always red buoys so comparing where the start of the red buoys were and where the finish line buoys were helped me learn to gauge what 250m looked like on the river when we were practicing. A lot of it is just carefully calculated guesswork though.

I also try and study the river that I’m on to get an idea of how far apart the major landmarks are from each other and then I convert the distance in miles to meters. On the Charles there are a ton of things you can use for landmarks but on your home course it can vary. My coach in high school, who was also a coxswain, taught me that trick and while it’s time consuming, it helped a lot. As I got used to what 50m, 400m, 1000m, etc. felt like it almost became like muscle memory to me so it’s gotten a lot easier to judge distances the more experienced I’ve become.

How to Call a Pick Drill (and Reverse Pick Drill)

Coxing Drills How To Novice Rowing

How to Call a Pick Drill (and Reverse Pick Drill)

By

Previously: Steer an eight/four

The pick drill

A pick drill is a fairly basic warmup (probably the most basic) that involves transitioning through each part of the stroke. It helps to isolate the recovery and the drive, as well as help the rowers with body preparation. The goal is to build one upon the other until you eventually get to full slide, where you can feel all four parts of the stroke flow together.

To start, have the rowers sit at the finish, blades squared and buried. The first part of the drill is “arms only” so if you’re doing the drill by 6s, you’d say “Stern 6, sitting ready at the finish, blades buried … arms only, ready row” and then have them row with arms only for however many strokes you choose. The standard number is 10 but with short, choppy strokes like this, sometimes I’ll extend it to 15 or 20 when there’s time. If you were doing 10 strokes, on stroke 8 you would make the call for the first transition, which is to arms and bodies. The reason it would be on stroke 8 is so that when you’ve completed “in two”, you’ll have rowed ten strokes. 8+2…get it? Don’t be that coxswain that says “10 strokes each” and then ends up doing 12 or 15 or 32. Believe it or not, rowers can count too and if they start to catch on that they’re doing more strokes than you’re telling them to do, that can lead to some not-positive feedback on your coxswain evaluations.

When I make the transition to arms and bodies, I usually say “alright, let’s add the bodies in two … that’s one … and two, on this one“, where “one” and “two” are called at the catch and “on this one” is called at the finish of “two”.

After arms and bodies comes half slide. Same call as before – “half slide in two … one, two, on this one“. Some coaches will have you do 1/4 slide after arms and bodies but more often than not this is skipped in favor of going straight to half slide.

Following half slide is full slide, which is the last part of the drill. When we go to full slide I remind the rowers to lengthen out and not shorten the slides up since the previous three parts of the drill involve either no slide or shortened slides. “In two, let’s lengthen out to full slide. That’s one … and two, on this one, stay nice and looong, catch send…” By drawing out the word “long” it almost forces the rowers to utilize the full length of their slides before they get to the catch. “Catch” is short and annunciated so that they don’t liken the long slides to a sluggish catch. Similarly to 1/4 slide, sometimes coaches will throw in 3/4 slide before going to full. Again, it’s up to you.

With the pick drill, it’s important that the rowers actually do each part of the stroke that you’re telling them to do. It’s broken down for a reason. I’m very hypersensitive to this because it is such a pet peeve of mine but there are few things in rowing that piss me off more than when I or another coxswain calls for “arms only” and you see the rowers rowing with arms and bodies. Drives. Me. INSANE. “Arms only” means “arms only”!! In the boat this is difficult to see from our vantage point but on the ergs it is definitely something we have the power to put a stop to. Don’t let the rowers cheat and use their shoulders either – on the first stroke of the drill to get the boat up and out of the water, fine, acceptable, but after that … arms … ONLY!!!

The reverse pick drill

A variation of the pick drill that your coach might have you do is called the “reverse pick drill”. This is a great drill for isolating each part of the drive and teaching rowers to not do one thing before the other (i.e. don’t bend the arms before the legs are down, etc.). Although it can take some time to explain, this is a great drill to do with novices due to their penchant for trying to open their backs while still on the drive and so on.

This drill, like the regular pick drill, is best done by 4s or 6s but you can do it by all eight if you want – just make sure the rowers keep it balanced otherwise it’s gonna be tough to execute. Starting with whatever group of rowers you choose, have them row with JUST the legs. Just the legs, contrary to what some rowers think means rowing with just. your. legs. No arms, no back, just. the. legs. This means that your upper body should still be reaching forward and your arms are still extended. The ONLY thing that happens between the catch and the first part of this drill is that your legs go down. The call to start this would be “Stern 6, sitting ready at the catch, blades squared and buried … starting with just the legs, ready row.” When I do this drill, for legs only I tend to do 10-15 strokes total.

Following legs only is legs and back. After the leg drive, you’ll open the back but keep the arms extended straight out – the arms are the final part of the stroke, which we haven’t gotten to yet. When you see it, this part of the drill tends to look very rigid due to the fact that the arms are still straight. When calling for the addition of the backs, say “in two, let’s add the backs, that’s one … and two, on this one, legs swing…”. Occasionally I like to say “swing” just to remind the rowers to pivot from the hips and open the backs up. After doing however many strokes without the backs, sometimes they’ll not lay back as much as they normally would; saying “swing” just puts the bug in their ear so they’ll do it from here out.

The final part of the reverse pick drill is to add in the arms and row normally. Up to the point, the arms have been extended straight out, so the call will go something like “in two, let’s add in the arms, we’ll go in one … and two, now accelerate it through … accelerate through, that’s it…”. Legs and legs + backs reiterates hanging off the handle and not breaking the arms early so once you do add the arms in you wanna make sure they’re accelerating the weight through the drive and all the way into the finish.

Below is a video that gives a good demonstration of the reverse pick drill and what it should look like.

 Image via // @mahe_ld

Coxing How To Q&A Rowing Technique

Question of the Day

By

One of my coaches was a coxswain and I got switched out the last third of practice to be in the launch with her. OMG BEST TIME EVER. Every time I had a question she’d answer it so well! More coxes should become coaches! One thing she was talking about was watching the wind patterns – like the dark patches in the water to let the crew know. I understand the concept, but I’m not really understanding why. Like, I tell them that a wind/wake is coming to prepare them?

The type of wind that you’re encountering will determine what you tell the rowers and how they should adjust their technique.

Headwind

Lay back just a little bit more than you normally would. If you look at a protractor and visualize that sitting straight up makes a 90 degree angle, your normal layback should be about 110 degrees (roughly – don’t overthink this). In a headwind, you want to layback just a little farther, to about 115-120 degrees. The reason why is because if you think about rowing into the wind, it’s going to slow you down regardless, but if your body is up high, it’s essentially acting like a brick wall and slowing the boat’s movement even more. When you layback a little more than usual, you’re allowing the wind to flow over you, which results in the boat not being slowed down as much.

Tailwind

The tailwind is going to push you along so you’ll be moving faster than you otherwise would, which can give the rowers the sense that their blades aren’t gripping the water like they should. Quick catches and maintaining connection will be important technical focuses here. The boat might be a little tougher to set up too so you can also make general reminders for that as well.

Crosswind

Crosswinds are the worst, in my opinion. Depending on how strong the wind is, it can actually push the boat into another lane or into the shore, regardless of how hard you steer. Crosswinds can also knock the boat offset so if I can see a gust coming on starboard I’ll say something like “gust on this next stroke, ports hands up…”, that way the “push” the boat will get from the wind will actually keep it even.

When I’m out I’ll watch the ripples on the water to see if a gust is coming or which direction the wind is blowing and then alert my crew and adjust my steering as necessary. If they’re going side-to-side or at an angle, it’s a cross wind, if they’re going in the same direction as us, it’s a tailwind, and if they’re coming towards me, it’s a headwind.

Coxing How To Q&A

Question of the Day

By

My coach says that there’s  “a feistier” side in me that my rowers may not know about me. I can see why, I seem a little timid at times, but on the water when I make calls, I guess my voice changes and I get really into it/competitive. She also told me I should work on being even more of a leader, esp. on the water. As in I could throw in some challenges like out of shoes rowing at the end of practice or something. How do I become an effective leader without coming across as a bitch, rude, etc. ?

The only time you’ll come off as a bitch instead of a leader is if you constantly yell at everyone and go on power trips. Treat other people how you want them to treat you. If you do that, you’ll earn respect from your teammates, which goes a long way when you’re in the position you’re in.

Related: My coach says that there’s  “a feistier” side in me that my rowers may not know about me. I can see why, I seem a little timid at times, but on the water when I make calls, I guess my voice changes and I get really into it/competitive. She also told me I should work on being even more of a leader-esp. on the water. As in I could throw in some challenges like out of shoes rowing at the end of practice or something. How do I become an effective leader without coming across as a bitch, rude, etc. ?

Don’t take your coach telling you there’s a “feisty” side to you as a bad thing. After the first week or so of going out with my masters 8+ we were at breakfast one morning and one of the women said “I love you as our coxswain but your personality is SO different in the boat – you’re such a bitch!!” At first I didn’t know how to take it until everyone chimed in and said that it was a compliment because my assertiveness, efficiency, knowledge, and most of all intensity make them want to be better rowers. If that’s what being a bitch is, then I’m not complaining. The important thing is knowing how to separate your in-boat personality and your on-land personality … you can’t take all the yelling you do into boat on land with you, otherwise people won’t take you seriously and they’ll lose some respect for you if all they ever hear you doing is yelling and bossing people around.

Coxing How To Novice

Question of the Day

By

Any tips on how to properly dock an 8+?

Trying to explain docking without any kind of visual is tough. I just think it works better when you can see what’s happening. Docking, like most basic coxing skills though, revolves around common sense. It’s also very trial and error based – you mess up a few times to figure out how to do it right. Trial by fire could also be an accurate description.

Obviously how your dock is set up will dictate how you come in but this should give you an idea of how it’s done. (Also, if it’s not obvious, read the image from the bottom to the top.)

You should never come into the dock with any more than stern pair rowing and you should never come into the dock with bow pair rowing. I don’t know WHY some coaches teach this because it seems so completely illogical to me. If you think about what part of the boat is hitting the dock first, wouldn’t it make more sense to have the rowers who are hitting the dock last be the ones rowing?

Also, don’t try and point towards the dock from the middle of the river. The current will pull you downstream and by the time you actually get to the dock, you’ll be at a 90 degree angle. Set yourself up so that even when you’re two or three lengths away, you’re only two or three feet off the dock from the end of the starboard side’s oars. If you end up taking too sharp of an angle to the point when your bow is on the dock but you (the coxswain) are five feet off it, have your stroke or seven back row, depending on who is on the river side and who is on the dock side. Obviously if your stroke is on the dock side they can’t row so have your 7-seat do it.

Last tip – make sure that you account for the speed of the current and the wind as you make your approach and tell the rowers to be quiet so they can hear what you’re saying. Docking can be tough when the elements are working against you so they need to be listening at all times in order to hear when you tell them to do something.

If you’re a novice, freaking out about docking is only going to make the actual event that much more scary. There’s probably a 99% chance that you’re not going to get it right on your first try – most of us don’t. Your coaches know this and should be on the dock to catch you and prevent any avoidable damage to the boat but if they’re not there to help you, they’re more at fault than you are because you’re still learning. However, that does not exempt you from using your common sense. Be smart about docking and it will come much quicker and easier to you.

Coxing Drills How To Q&A

Question of the Day

By

Transitioning by fours in an 8+ always confuses me. I know you start with stern four, then stern pair out, then three four in, but what’s after that? Who goes in and out in what order? Thanks!

It’s actually pretty simple because there’s only two pair switches you need to make to get between stern, middle, and bow four. Once you’re done with bow 4 it’s only a matter of whether you’re continuing rotating through the fours again or going to 6s or all eight (in which case, the addition of the rest of the pairs is self-explanatory).

Coxswain skills: “So, what did you see?”

Coxing How To Novice Rowing

Coxswain skills: “So, what did you see?”

By

This is one of my favorite questions to ask coxswains. Most see four or eight oars and … that’s about it. When their coach asks them what they noticed during that last piece there’s usually a second or two where they try and think of what to say before giving a super vague answer that sounds something like “Um … the boat wasn’t set and timing was off.”

Remember, we’re the liaisons between the rowers and the coaches. It’s our responsibility to convey what’s happening in the boat so that the coaches know what’s working, what’s not, what they need to spend time focusing on, who needs some extra individual attention, etc. Specifics are what drive our sport. If you say “the boat wasn’t set”, I’m going to respond with “OK, why? What side was it down to? When did it go offset? Was it offset at certain points in the stroke or for the entire stroke? Did you make a call for a correction? Do you know how to correct it? Etc., etc., etc.” THOSE are the kind of observations that make you an invaluable asset to your crew.

When you’re in the boat you should constantly be observing (and feeling) what’s going on and relaying what you see to the rowers. Your eyes should never stop moving. Before you tell the rowers what you see, make sure you understand what you’re seeing. Don’t tell them something you yourself don’t understand. If you see something that seems off but aren’t sure how to relay it to the rowers, say “Hey Coach, I noticed XYZ but I’m not sure what that means or how to fix it”.

One of the best ways to be able to see all of this is to watch video of your crew rowing. This allows you to see the entire eight from the side, which isn’t a view coxswains often get unless they’re in the launch. By observing the crew from the side, you can see what the timing on each side looks like, what the rower’s bodies are doing, where their hands are, if their chins are up, etc. The bodies aren’t something we can see in the boat, so if we can study them externally we can start to develop a better sense of each of our rower’s tendencies. If your coach is able to ride behind you and can get an shot of all eight rowing, you’ll be able to see the timing of the entire crew even better.

THE SET

If the boat isn’t set, ask yourself the following questions. See if you can figure out why it’s not set based on your observations. Don’t assume that it’s offset just because of the handle heights.

When the boat’s not set, is it always down to the same side or does it go back and forth between starboard and port?

Is it off on every stroke or every few strokes?

At what part of the stroke is the boat not set? (Catch, release, recovery, etc.)

If it’s offset on the recovery, is it at the beginning when the rowers first move their hands away or later when the bodies extend? When moving hands away, are the hands and arms moving in an arc instead of straight away? (This is easy to determine based on whether or not the oars stay at the same height off the water the whole way through the recovery.) When the upper body pivots at the hips and moves forward, make sure the hands aren’t dipping at the catch (skying the blade). If the blades are dragging across the water, the hands are too high and need to lower a bit.

If it’s offset at the catch, it’s typically caused by uneven catch timing (everyone entering at a different time) or hands dipping down towards the feet. If the hands are dropping it could be because the heads/upper body are dropping.

If it’s offset at the release, the timing of the release may be off or the oar may be being buried too deep. They’ll know if it was buried too deep when they catch a crab.

Does it start as a slight lean and then all of a sudden drop down at the catch or does it remain steadily offset throughout the whole slide movement?

Are port and starboard exerting equal pressure or is one side pulling harder than the other? This will be one of the easiest things for you to notice since it will effect the steering.

Are everyone’s heads in the boat, with their eyes and chins up?The slightest turn of the head can offset the boat which is one of the main reasons why the rowers are constantly reminded to keep their heads in the boat and their eyes forward.

TIMING

Timing can be a tough thing to see at first, especially in an eight. You have to use your peripheral vision in order to see all eight blades at once, which can be awkward sometimes since it involves staring almost directly at your stroke’s chest.

Is everyone catching, squaring, and feathering at the same time? Point out who is late/early on each part and try to get everyone in unison. If they’re late at the catch, remind them to start squaring up over their knees so that by the time they’re at the catch all they have to do is drop the blade in. Make sure they get the handle down and the blade out BEFORE they feather.

Are the other seven (or three) rowers following the stroke? Is the 7-seat (or 3-seat) picking up the stroke’s rhythm and translating it back to the rest of the crew? Periodically ask the stroke how it feels. If he says it feels rushed, remind everyone else to match the hands, shoulders, and slides as they come out of the finish and if necessary, call for a ratio shift.

Is everyone moving at the same speed? Watch for oars flying back and then waiting at the catch, going slow during part of the recovery and then speeding up at the end, etc.

DRILLS

When your coach gives you a drill to execute with the boat, focus on the purpose of that drill and what the rowers are trying to accomplish. For the most part, this should be the bulk of what you’re critiquing. If you’re not sure what you should be looking for with each drill, ASK. If you do a drill incorrectly, not only are the rowers going to be annoyed because they’re not getting anything out of it but the coach will also be too because you wasted valuable time.

HANDLE AND/OR BLADE HEIGHTS

Is someone skying their blade/dragging it across the water consistently? This goes hand in hand with the set. If you notice this, tell the rower, pair, side, etc. what you see and how to correct it.

PRESSURE

Occasionally your coach might ask “how’d the pressure feel on that piece?” It’s important that you be honest, especially if you’ve been given a specific pressure to row at for the piece. You’ll quickly learn what your rower’s half, 3/4, and full pressure feels like, so if it doesn’t feel like they’re rowing at the specified pressure, don’t be afraid to ask for more.

Also know when to tell them to back off the pressure, if necessary. Warmups are not the time to be rowing at full pressure, so tell your crew to stop showing off and instead focus on what you’re telling them to do. I’ve found through coaching that this is most often the case when you’ve got a boat full of high school guys who just recently started rowing; experienced rowers don’t tend to have this problem.

Image via // @ellendemonchy
How to prepare your crew to row

Coxing How To Novice Rowing

How to prepare your crew to row

By

One of the best ways to keep practice moving and avoid wasting time is to give clear instructions before you start rowing. Telling the rowers exactly what you want avoids  having to listen to them say “well, I didn’t know where we were starting from” or “oh sorry, didn’t know it was just stern 4 rowing”.

Before you start a drill or a piece, here’s what you should be saying to your crew.

Who is rowing – all eight, stern four, bow four, outside pair, etc.

Where to start from – the catch, finish, 1/2 slide, etc.

What sort of rowing – a) slide position, either arms only, bodies over, quarter slide, etc, b) feather or square blades, and c) continuous paddling or paused (don’t bother saying unless it’s paused)

How hard to row – light, quarter pressure, half pressure, three-quarters, firm, full, etc. Make sure that when you ask for a pressure, the crew respond appropriately. Don’t be afraid to tell them to bring it up if it seems inadequate to you.

When to start – “Ready all, row.” Remember, you’re not really asking them if they’re ready…you’re more so telling them. If someone isn’t ready, more often times than not you’ll know before you make this call.

“Ready all, row” is a significant call that means many things. When I first started the blog this was what I said about this particular call:

“The title of the blog comes from the command that coxswains make before the rowers begin rowing. It signifies that everyone knows what’s going on and they’re ready to row. For coxswains, it signifies an understanding of the instructions given by the coach.”

When you’re transitioning between exercises, pairs, etc. it’s always “in two”. Make sure you say “one … two” with the stroke’s catch, since that is what everyone is following. One of my biggest pet peeves is when coxswains say “one, two” like they’re counting seconds … the rowers probably aren’t even at the catch yet when they say “two”, which causes them to rush up the slide to match what you’re saying and it just turns into a clusterfuck because people don’t know what’s going on. Yes, the transition is on your call but your call has to match up with when the stroke is rowing. With more experienced crews you can say “on this one” denoting the transition on the NEXT stroke instead of in two. This is what I frequently use with my eight. If you have strokes 1, 2, and 3 and you want to make a transition on stroke 4, you would call “on this one” at the finish of stroke 3.

The specific calls themselves tend to differ between countries (in the UK, “easy there” vs. “weigh enough”, “from backstops” vs. “at the finish”), but the instructions themselves are relatively similar. The end goal, however, is the same – everyone doing exactly what you want. (That sentence is probably the main reason why coxswains get egos too big for our tiny bodies.) Giving clear and concise instructions when you’re on the water maximizes the time you’re able to spend rowing and minimizes the amount of wasted time, so be sure that you are giving them the information they need to be ready to row.

Image via // @harry_brightmore