Category: Rowing

Top 20 Terms Coxswains Should Know: Cut the Cake

Coxing Drills Rowing Technique

Top 20 Terms Coxswains Should Know: Cut the Cake

By

Previously: Rush(ing) || Body angle || Pick drill || Suspension || Skying the blade || Quarter feather || Pin || Run || Lunge || Washing Out || Missing water || Footboard || Check || Ratio || Over compression || Release

What part of the stroke/stroke cycle does it refer to

Cut the cake occurs on the recovery and targets the finish through bodies over part of the stroke.

What does it mean/refer to

“Cut the cake” is a drill that focuses on swing and body prep and emphasizes getting the hands out of bow at the same speed together in order to maximize the amount of run you’re getting on the recovery.

Related: Top 20 terms coxswains should know: Body angle

There are several versions of this drill but in the normal one you begin by taking a normal stroke and then on the subsequent recovery you pivot forward with the bodies, swing back to the finish (drawing the arms all the way through), and then swing forward again and come up to the catch. That swinging motion when the bodies pivot back and forth is the actual “cut the cake” part (although I really have no idea why it’s called that).

Relevant calls

The two main themes/calls that I base a lot of what I’m saying around are “pivot” and “stretch”. Pivot has to do with the swinging part of the drill, where you’re going from the finish position to bodies over, and I make calls relating to that because I want the rowers to be conscious of pivoting, swinging, etc. from their hips and not reaching or lunging from their low backs. The stretch call also relates to the bodies over position because when you’re sitting up and pivoting from your hips, you should feel just the slightest stretch in your hamstrings. (Obviously flexibility plays a big part in this … the less flexible you are the sooner you’ll feel that tug as you swing forward.)

Outside of those two calls, I’ll make calls as necessary to even out the speed of the drill if it looks like they’re rushing through the cut the cake part, as well as reminders to hold the knees down and/or break them together as they start the slides.

What to look for

You can see what the drill looks like in the videos below.

One of the things that makes cut the cake complicated and/or not fun is how easy it is to screw up the timing. It’s easy to think that this happens on the recovery when you’re swinging back and forth but it more often happens as a result of people driving at different speeds, which then causes them to finish at different times and then have to rush through the cut the cake part to catch up with everyone else. So, if you find that the timing is off, focus first on getting the finishes together before moving on to trying to match up the hands, bodies, etc.

Another thing to watch for is the speed at which the rowers move through cut the cake. It should be a natural speed that matches the speed at which they’re driving and recovering … it shouldn’t be a steady speed through the drive, fly through cut the cake, and then slowly proceed up to the catch.

Effect(s) on the boat

Cut the cake touches on a lot of different things like balance, swing, body prep, rhythm, etc. but the timing of the hands coming away at the finish is arguably one of the more important aspects of the drill. If you consciously go through the drill instead of just going through the motions then this can really help  the timing on the recovery by getting everyone moving together and at a steady speed, which in turn allows the boat to run out further between strokes (thus increasing the efficiency of each stroke).

Related posts/questions

I haven’t talked about this drill much on here so there aren’t any related posts or QOTDs to share but below is a video that shows a variation of cut the cake called “rusties” (it’s literally the same exact drill with a pause at the finish and bodies over instead of a continuous flow between the two) that we occasionally do as part of our warmup.

To see all the posts in this series, check out the “top 20 terms” tag.

Image via // @beantownkmd

Q&A Rowing Training & Nutrition

Question of the Day

By

OK, so I will preface this saying that I know this was not my best winter, but I have not been working out nearly as much as I should. I’ve had various injuries to work through but I’m fully cleared now and probably could have been working out more through it. Anyway, I’m pretty nervous with the season coming up that I’m not going to be up to par so do you have any workout (or other) suggestions to be in better shape for the season? Thanks so much!

Just get on the erg and do some steady state. If you can’t erg for whatever reason, run, swim, or bike. Usually when our guys can’t erg we have them go on seven mile runs or they jog over and do a full tour of Harvard Stadium (which is 37 sections + 3 miles there + 3 miles back). If the weather’s bad or the conditions are unsafe (i.e. snow or ice) then they’ll do Green Buildings (self-explanatory once you see the picture) with weight vests on. They’ll also hop on the bikes and go at whatever pace the guys on the ergs are going (meaning they’ll bike lightly during the rest periods but amp it up during the actual pieces). The coxswains have started taking their heart rates to make sure they’re in the right zones so I’d recommend doing that regardless of what you do, that way you can be sure you’re training the right way (and actually working hard vs. just feeling tired because you’re not in rowing-shape yet).

I’d also make sure you’re communicating with your coach(es) too about your injuries and progress (if they don’t already know). They’ll care a lot less about whatever shape you’re in if you let them know what’s going on and keep them updated vs. not saying anything at all and showing up wildly out of shape on the first day.

Top 20 Terms Coxswains Should Know: Release

Coxing Rowing Technique

Top 20 Terms Coxswains Should Know: Release

By

Previously: Rush(ing) || Body angle || Pick drill || Suspension || Skying the blade || Quarter feather || Pin || Run || Lunge || Washing Out || Missing water || Footboard || Check || Ratio || Over compression

What part of the stroke/stroke cycle does it refer to

The finish.

What does it mean/refer to

The release is the part of the stroke that occurs immediately after the actual finish – it’s when the outside hand applies weight to the handle, causing it to tap down and release the blade from the water. The terms “finish” and “release” get used interchangeably but they’re actually two completely separate parts of the stroke. At the finish the blades are in the water and at the release they aren’t (which is why it makes no sense when coxswains tell the rowers to “sit at the release” before they start rowing), although the bodies are still in the same layback position.

Relevant calls

Many of the calls I make specifically about the release have to do with the set of the boat. One of the things we say to the guys a lot, particularly if the boat is looking wobbly, is “release to the balance”, which gets them thinking about the position of their hands relative to the set of the boat. I’ve adopted this call too when I’m coxing and usually say something like “…let’s make sure we’re releasing to the balance … right [catch] here [finish] … haaands [drive] here [finish]… haaands here …”. I try to save this call for when the boat is consistently off-set rather than just a wobble here or there, mainly because I know it gets the rowers’ attention and I don’t want to wear it out.

Another one is “cut the pressure before the bodies, come down and away smoothly…”. This isn’t so much a “coxing” call that I try to line up with any particular part of the stroke, rather it’s a “coaching” call that I say conversationally as we’re rowing. I try to follow it up with a specific “coxing” call though, usually something like “smoooth here“, “hands here“, “cut it now“, etc.

What to look for

Because the finish and release only differ by about six inches in handle height, one’s ability to tap down at the release is largely effected by their posture at the finish. Not laying back enough or laying back too far can inhibit the movement of the hands here because it’s practically impossible to tap the handle down when your body is directly underneath it. (If you’re laying back too far it’ll be your stomach and if you’re not laying back enough it’ll be your thighs.) On the water you can make reminder calls for this but on the ergs is where you can really coach the rowers (particularly novices) on proper body angles, posture, etc. Plus, it’s a lot easier to do this on land when you can actually manipulate them to the right positions vs. on the water where it can be tough to explain what it should look/feel like.

At the release, assuming pressure was cut before the handle reached the bodies, you should see the blades cleanly pop out of the puddles and then feather over the water. If you’re seeing the blades get stuck in the water as the recovery begins (which at best will cause the boat to go off-set and at worst can cause crabs of varying magnitudes) then a couple things might be happening, the first of which is what I mentioned above about not giving yourself room to tap down. The other is not accelerating the blade through the drive into the finish. If you’re connected on the drive and have good acceleration the blade will naturally pop out more easily at the release whereas a lack of acceleration will cause the puddle to close up and essentially act like a brake (tl;dr physics), which obviously limits the carryover of acceleration and kills the boat’s run.

With regards to feathering, watch that they’re not feathering before the blade is fully out of the water too. You’ll be able to tell if this is happening because you can see the water getting flipped up as the blade rotates. In my experience this happens most often when people feather with both hands because they’re rotating the handle down into their laps instead of drawing straight through, tapping down with the outside hand, and then feathering with the inside. Square blade and outside-arm only rowing, along with delayed feather drills can help fix this though.

Effect(s) on the boat

The effects of a poor release will be felt on the subsequent recovery and catch, usually in the form of the boat being off-set or poor posture on the previous finish causing timing issues with getting the hands down and away (and bodies over) on the next recovery which leads to a late/poorly timed catch. A clean release though provides a stable platform for the rowers to work off of and lets the boat take full advantage of the power and acceleration that was generated on the previous stroke by allowing it to run out further between strokes.

Related posts/questions

Heeey so at the moment we’re doing a lot of work on the finish and the release but I am struggling to come up with calls that really work. I have a few basic ones but not many so I find myself repeating them over and over and over and over. Do you have any calls for technique at the finish and release that i could borrow or modify to suit my crew?? TY x

The Kiwi pair does this really incredible thing where they take their oars out of the water SO FREAKING CLEANLY and I am having such a hard time trying to do it, I can never tell if I’m throwing water around when I feather my blade and IDK if you know what I’m getting at but yeah help?

To see all the posts in this series, check out the “top 20 terms” tag.

Image via // @rowingcelebration
Coxswain Recordings, pt. 35

Coxing Racing Recordings Rowing

Coxswain Recordings, pt. 35

By

Something I really like about these recordings is how sitcom-y they feel. You know how in any show things start off fine and then something happens but then at the end things are good again, if not better? That’s what these pieces are like – the first one was alright, the second piece not great, and the third is where they make some changes and it all comes together. We’ve all had practices like that but this is the first set of recordings I’ve come across where you can actually hear and feel how the pieces ebb and flow throughout the practice. If you struggle with how to call practice pieces (i.e. how to find that balance between race-coxing and still maintaining a technical focus), you should definitely make time to check these out and take notes.

University of Washington 3x1500m, Piece #1

At the beginning I like when the coach (Bob Ernst, I think … this would have been his last season with the men before switching to the women’s team) says “try not to make it a tug of war with the upper bodies”. When the water’s not great or there’s a headwind it’s easy to fall into the trap of pulling more than you’re pushing and it can be tough to come up with a way to communicate that (that’s not the same played out “make sure we’re driving with the legs” calls…) so I like the tug-of-war analogy there.

Throughout these pieces you’ll hear Katelin talk a lot about the rate and where to bring it up (the drive) and bring it down (the recovery). If you’re trying to take it up, “a beat through the drive” is the simplest, most straightforward way to communicate that and avoid creating a lot of rush on the recovery. The “through” part of it is kinda crucial too because you want the crew to be accelerating from catch to finish and “through” says that without you having to throw in a bunch of extra words and make the command longer than necessary.

It’s not until they’re sixty seconds into the piece that she first mentions the other crew … and only to say that the other coxswain is taking a move but they’re walking on him as he does it. The next time she mentions them (thirty seconds later) is when she says they’re gonna take a move when she’s next to their bow man … but the move isn’t for the other boat (i.e. to take another seat, get the bow ball, etc.), it’s for them (five for timing, five for the legs) and that is one of the key things about calling pieces in practice like this. Are you “racing” the other boat? Yea sure, but you’ve gotta get your own shit together first if you want to actually be able to race the other boats like you would other crews during an actual race.

She does a really good job of telling the crew where they are and what she wants while keeping the atmosphere calm and focused. They’re racing but she’s keeping them more in tune with what’s happening in their boat instead of constantly calling out the other crew and ignoring the technical issues that you hear her making calls for. THIS is one of those key things that, as a coxswain, the sooner you get it the better – she could have just called this like a normal race and made a third of the technical calls she’s making and the crew might have still finished ahead … but at the end of the day they wouldn’t be any faster. Because of the technical calls she’s making and the way she’s incorporating them into her race strategy, she made them faster that day by being relentless about holding the crew accountable for their strokes. (And now she’s coxing the national team so take from that what you want.)

At around 4:10 you can hear her stroke or 7-seat say “let’s open it up … open water” and then the next series of calls she makes is that ten to get some separation between the two crews. THREE MINUTES AFTER THE START OF THE PIECE and that’s when her boat starts to really race the other one. THREE MINUTES. THREEEE. MINUTESSSS. Her tone intensifies, her calls intensify, and the focus has clearly shifted to walking away. I also really like the call “do not get up and sit up” call she makes towards the end of the ten. They’re not being walked on (yet) but they’re also not walking away either … in that situation they’re the easier target.

6:41 is probably one of my favorite “speeches” I’ve heard a coxswain make in awhile. A lot of coxswains are … for some reason … afraid to say shit like this to their crews but sometimes you really do just need to get on them and say it’s really fucking unacceptable that we – WE – let this happen. This is also a perfect example of the difference between being a bitch and being authoritative and really reiterates the point I was trying to make in the post linked below from November. Next time someone tells you to “be more bitchy” when you’re coxing, this is what they want you to do.

Related: The Bitch in the Boat

University of Washington 3x1500m, Piece #2

The tone of this piece is a little different because they lost a length at the end of the last piece so they’re fired up and planning on going hard right off the line to match the other boat. Spoiler alert, this backfires. Now don’t get me wrong, I love that she says “we’re not waiting to make the move” (that’s a great call, especially for situations like this) but as the piece goes on you can hear how that mindset, while good in theory, probably contributed to a lot of the slide control issues they experience. I don’t think you need to spend three minutes waiting to get into race mode on every single piece but at the very least you do have to establish your in-boat presence first (whether that takes ten strokes or two minutes, whatever) before your focus shifts to walking on or away.

At 3:44, I like how she splits up this ten. A lot of coxswains, particularly younger, less experienced ones, will call for a ten and then trail off midway through because whatever they called for didn’t actually need to be ten strokes long whereas here, she calls for a ten but it’s actually two fives that are focused on timing at both the front and back ends of the stroke. This is a much more effective way of matching up the timing without saying “move together”, “watch stroke seat’s blade”, “ten for catch timing”, etc.

Related: All about Power 10s

At 5:11 you can hear her stroke seat yell out “get long, get longer!” and then the next set of calls she makes after she finishes the ten are for length on the slides. Normally if my stroke says something to me or yells something out to the boat when I’m calling a ten (it’s always during bursts) it knocks me out of my bubble for a second and I’ll stutter on the next call because it’s like “wait, what just happened?” … I hate that. I can’t tell if that rattled her focus or not (which is good, obviously) but even if it did, she did a great job of finishing up the ten and then immediately incorporating in calls to reiterate what her stroke said. This is another thing you should talk about with regards to communicating with your stroke. I’m OK with my stroke talking to me (as you hear her stroke doing throughout the pieces) or occasionally yelling things out to the boat but one of the few no-no’s I have is if I’m calling a burst, don’t say anything until we’re done because I just go into a zone when I call those 10s and 20s and them saying something just jolts me out of it. If you don’t like your stroke yelling out to the boat or talking to you when you’re calling 10s or whatever else, make sure you have a conversation with them about that off the water.

Her point at the end about it not being a big deal if they get up a couple seats applies to pretty much any situation with any boat ever. A few seats isn’t a death sentence so long as you regroup and focus your energy through the drive and not on trying to get to the catch faster just so you can get your blade wet again.

University of Washington 3x1500m, Piece #3

Her stroke makes a good point at the beginning about it being the same number of strokes and that they just need to get longer on each one. If you’ve ever done those “how far can you go in X number of strokes” pieces then you’ll get what he’s saying. The crew that controls the slides and accelerates the handles on each stroke is going to be the one that covers more ground and does so more effectively, not the crew that is rowing at the same stroke rate but has lost their ratio in the process.

Compared to the previous piece, you can hear the difference in her tone at the beginning here. It’s pretty similar to those pieces from the last set of recordings where the stakes are high but you know that she knows that the key to her crew’s bow ball being in front at the end is staying calm, focused, and loose right from the start.

At 2:11, that’s the kind of positive reinforcement you should put out there when your crew does something well, particularly the “nice fucking response, that’s the way to get it done” part. Obviously you don’t have to say it exactly like that but you can’t deny that just hearing “nice response” would probably make you sit a little taller and push a little harder on the subsequent strokes. (Also another example of swearing with a purpose.)

2:52, “let ’em know it’s over” … this is one that I would save for just the opportune moment – it’s one of those afterburners calls that just reignites the fire at the end of a piece. I distinctly remember using this call once during a similar workout where we’d been sitting on the other boat for probably 5-7 strokes after having walked up on them about half a length on our previous move to get almost even (we were maybe half a seat to a seat back).This was a crew I knew we could beat (I was in the 2V and we’d been evenly matched with our 1V on the ergs and the water for pretty much the whole season) and I could tell the other crew was getting comfortable with us being beside them, to the point where they thought we were starting to fall apart because our progress on them had stalled. I heard the other coxswain say something to the effect of “show them why YOU’RE the 1V” and my stroke said “fuck that, let’s go” so I called a ten and made the “let ’em know it’s over, go now” call. We ended up finishing two seats up and me, my stroke seat, seven seat, and three seat all got switched into the 1V.

You can find and listen to more recordings by checking out the “Coxswain Recordings” page.

Top 20 Terms Coxswains Should Know: Over Compression

Coxing Rowing Technique

Top 20 Terms Coxswains Should Know: Over Compression

By

Previously: Rush(ing) || Body angle || Pick drill || Suspension || Skying the blade || Quarter feather || Pin || Run || Lunge || Washing Out || Missing water || Footboard || Check || Ratio

What part of the stroke/stroke cycle does it refer to

The catch.

What does it mean/refer to

The position your body is in at the catch – hips behind the shoulders, shins vertical, etc. –  is called “full compression”. Over-compression is when you go beyond this point and your knees end up over your toes (instead of in line with your ankles). Shorter rowers (and novices) have a tendency to over-compress at the catch as a way to get more reach.

Relevant calls

I don’t make a lot of calls for this on the water because I can’t see when it’s happening (unlike other things I can’t “see” where I can pretty closely guess what’s going on based on the bladework). Plus, over-compressing on the water is a more rare occurrence than over-compressing on the ergs so even when I’m coaching it’s not something I see that often (at this point though that might be more of a factor of who I’m coaching than anything else though).

When we’re on the ergs most of what I’ll say will be simple stuff like “too far…”, “stop a little shorter…”, etc. if I see them coming too far up the slide and then once they’re stopping closer to full-compression (rather than going past it) then I’ll have them pause at the catch and tell them to think about what this position feels like and if we’re beside any mirrors I’ll have them look over to see what their bodies look like, where their slide is in relation to their heels, the angles their shins are at, etc. If you have less-experienced rowers who haven’t fully figured out where full slide/compression is yet then utilizing mirrors/video while on the ergs during the winter is the best way for them to figure this out. (You can also use the tape trick to help with this – figure out where full slide is and then put tape on the slide so that the rower feels the slide hit it if they compress too far.)

Sometimes over-compressing can be a byproduct of not getting the bodies set soon enough so if I see that happening then I’ll address that first (read the post linked below for more on that) and usually the over-compressing (which has them sitting straight up, heels right up against their butt, and hips directly under the shoulders) corrects itself.

Related: Top 20 terms coxswains should know: Body angle

What to look for

This is what correct full compression looks like…

…and this is what over-compression looks like (note the positioning of her shins at the catch)…

https://www.youtube.com/watch?v=q97MlxjkZ6o

In some cases on the water, usually at the beginning of the season or if the rowers are switching seats a lot, you might find that the foot stretchers (if they’re set too far towards bow) need to be adjusted to prevent them from over-compressing. This shouldn’t be the first thing you jump to though to fix the issue unless it’s completely obvious that it’s the cause and not the rower’s technique.

Related: Top 20 terms coxswains should know: Footboard

Effect(s) on the boat

The effects of over-compressing obviously have an effect on the boat but they more drastically (and obviously) impact the individual’s stroke than they do the entire boat. The biggest impact is on their power output because it puts you in a weak position when you go to initiate the leg drive; instead of relying on the quads and glutes to help you generate power as you drive off the footboards, you’re now relying on the smaller muscles of your calves as you start the drive. If you’re trying to get more reach you might get an extra inch or two but in the end you’re sacrificing some of your power to do so.

Related posts/questions

Hi! So I recently started rowing not to long ago, as I just did two weeks of long skinny boat camp. But as I was rowing I kept getting told not to over compress at the catch. Also to relax my shoulders. I am short, only 4’11 and I talked to the coach about coxing(my sister is a captain) in high school and he wants me to row first. Do you have any tips I can take from the rowing? Also how not to over compress at the catch? Thanks! I love your blog!

To see all the posts in this series, check out the “top 20 terms” tag.

Image via // @row_360

Racing Rowing Video of the Week

Video of the Week: 2000 Sydney Olympics Men’s 8+ Final

By

To follow up last week’s VOTW (if you haven’t watched it yet, I’d set aside some time to do that), here’s the race video of the men’s eight final from the Sydney Olympics. By now we all know how it ended up for the Americans but after watching the documentary from last week, it puts the race in a different (slightly more gut wrenching) light.

Coxing Drills Novice Q&A Rowing Technique

Question of the Day

By

Hi! So I am in my fourth season of crew, and my second season of coxing. Our season started Monday and the novices were already on the water. I was not with either of the novice boats that day but I coxed one today. I found it really difficult to teach them everything. Do you have any advice on how to teach the novices? Also, our first race is in 4 or 5 weeks, so the novices need to get the hang of it as soon as possible so that we can get “normal” boats put together. My boat today was able to row all 8 (6 novices and a 2nd season rower and stroke) fairly well. Any and all advice would be super helpful. Thanks so much!!! I love your blog- I’ve used it since I started rowing.

Therein lies the problem – you can’t teach them everything all at once. Imagine you’re sitting in math class and your teacher starts the day by teaching you to add two numbers together and finishes 90 minutes later by trying to get you to do differential equations … that’s what most coxswains (and new coaches – I was definitely guilty of this) try to do when they’re in charge of a novice crew. You have to start really simple and build from there once you’ve established a solid foundation. 4-5 weeks is plenty of time to get them rowing well enough to race so don’t rush through everything or try to pile on too much in a short period of time just because it feels like you don’t have that much time to work with.

I run our walk-on program in the fall and what we always start off doing (both on the ergs and in the boats) is a super basic pick drill. We’ll start off doing arms only for awhile (like, 15-20min) and I’ll walk around the ergs adjusting peoples’ form and making sure they’re getting the motion down. It’s obviously not going to look great but if it’s like, 75% there I’m happy. From there we’ll take a break and then do arms + bodies. Same routine, I’ll walk around and coach people as necessary but for the most part I want them to just focus on getting the motions down. Even though there are like, a thousand things I could say to them I try to err on the side of letting them figure it out for themselves (unless it’s so egregious that I have to say something) since I think that’s goes a lot further than if I were constantly in their ear nitpicking everything they’re doing.

Once they’ve got arms + bodies down we’ll go back to arms only and blend the two together, so 10 strokes doing that and 10 strokes adding in the bodies, and then we’ll repeat that once or twice more. The next day we’ll start with what we finished with the day before, cycling through arms and arms + bodies before adding in the slides. We’ll start with determining where half-slide actually is, what it should look like, feel like, etc. and then I’ll have them row at half-slide for a bit, similar to what we did the day before with arms and arms + bodies. Most of the coaching I do here is just reminding them to get the hands away and bodies over before the slides start and to not go too far past where half-slide should be.

Another point of focus is feeling what it’s like to drive off the footboards with the legs at the catch, although I don’t bring this up until I feel like they have a comfortable grasp on the recovery sequence. After they’ve got half-slide down we’ll lengthen it out to full slide and repeat the whole process again. Points of emphasis here are, again, hands away/bodies over before the slides start and not flying up the slide just because your butt is on wheels.

Assuming our first practice is on a Monday, we’ll do all of that on Monday, Tuesday, and Wednesday (with Wednesday just being a “review” type day of everything up to that point … nothing new gets added) and then on Thursday/Friday we’ll start off with the pick drill (15-20 strokes each) before going into 3-5 minutes of continuous rowing (ideally in the tanks if they’re available). After that we’ll take a break and then do some kind of drill – like cut-the-cake or a pause drill or something relatively simple like that – before going back to a few minutes of continuous rowing.

Once we get on the water (and after spending the first day doing “admin”-type stuff – i.e. how to set the boat when you’re rowing and not rowing, what stern four, bow six, etc. means, how to spin, and all the other basic stuff) we’ll repeat what we did on the erg, either by pairs or fours depending on if we’re in a four or an eight and what the weather is like. The more stable you can make the boat, the less frustrating practice will be for them and you so always lean towards having less people rowing when it’s safe to do so. Oh, and don’t even think about rowing on the feather for at least a few days (or longer…). Stay on the square while going through the stroke sequence, rowing by 6s, etc. and get them comfortable with figuring out blade heights, setting the boat, etc. before you teach them the feather. Keep in mind that square blade rowing is a pretty useful drill in itself.

Related: Hi, I was wondering about coxing brand new novices. I’m in boats right now where most, if not all, people are still learning how to row and working on figuring out technique so I haven’t been making very many calls other than if the balance is terrible or if people aren’t rowing together because my coach is talking individually to people to work on body form and things I can’t see. I feel bad about not saying very much, but I don’t want to interrupt the coach or focus on things not important right now. Other than steering straight and paying attention to explanations for correcting form, what should I be doing to improve my coxing?

What my coaches always did (with us as novices and as an experienced crew) and what I try to do with the walk-ons is once we were able to row by all eight (and not have it be a total shitshow), we’d row 20ish strokes by sixes and then all eight for 10 on the feather, rotating through the sixes for … probably 30ish minutes or so. A couple practices later we’d do the same thing except reverse it – 20ish strokes by all eight on the feather and 10 by sixes on the square – before eventually making our way to all eight on the feather (at which point we’d eventually work in varying rates and pressures to keep things from getting too boring).

All in all, everything I just said could be covered in roughly three to four weeks, depending on how quickly you moved through it all, which gives you a week or two to introduce them to racing and how all that works.

Related: Managing novice coxswains

All that aside, the best advice I can give you is to talk with your coach and figure out what their plan is for coaching the novices. If they want you to be in charge of coaching them while you’re coxing (which isn’t uncommon) then at least discuss with them what you should cover each day so you’re not trying to come up with stuff on the fly. If you’re going out with your coach then let them do the bulk of the talking/coaching while you act as the reinforcer of what they’re saying as necessary. Make sure that whatever you are saying is communicated as clearly and in the most simple manner as possible too. If it can be broken down into simpler concepts, do it. You’ll end up saving a lot of time in the long run when you don’t have to go back and re-explain something that you didn’t cover initially because you thought it was obvious or assumed. (I touch on that in the post linked above – it’s about coxswains but the ideas behind the first three bullet points could all easily apply in this situation too.)

Top 20 Terms Coxswains Should Know: Ratio

Coxing Rowing Technique

Top 20 Terms Coxswains Should Know: Ratio

By

Previously: Rush(ing) || Body angle || Pick drill || Suspension || Skying the blade || Quarter feather || Pin || Run || Lunge || Washing Out || Missing water || Footboard || Check

What part of the stroke/stroke cycle does it refer to

The recovery and the drive, but it’s primarily referenced while on the recovery.

What does it mean/refer to

Ratio is the contrast between the drive and recovery. The standard ratio for rowing is 2:1, which means that the length of time spent on the recovery should be twice as long as the amount of time spent on the drive. To understand why this is necessary, read the first paragraph of #2 in last week’s post on check (linked below). Pretty much everything that’s discussed in the “check” post and the “rush(ing)” post, as well as any of the other posts linked in there, will be relevant to this one.

Related: Top 20 terms coxswains should know: Check and Rush(ing)

As you start rowing at higher rates the ratio is going to get closer to 1:1 (the boat has more momentum so the recovery doesn’t need to be as long) but you can still maintain the same sense of rhythm that you have at lower rates by focusing on letting the boat run under you. Another way of looking at it is letting your feet come to you rather than you moving towards your feet. This ensures a consistent recovery speed by minimizing the chances of you throwing your weight forward or rushing the slides.

Relevant calls

Several of the calls I make for ratio are detailed in the two posts linked below. Another call I recently picked up was “execute some patience”, which refers to keeping the recoveries controlled and consistent.

Related: Top 20 Terms: Run, specifically the “relevant calls” section

You want to avoid generic calls like “slow the slides” or “let me see that ratio” (I hate that call) because they’re not effective and don’t give the rowers anything to go off of. Saying “slow the slides” is just asking for all eight people to slow them down at different times/speeds so if you’re going to make a call like that (which you really shouldn’t unless you’re with a more experienced crew that can infer what you mean from that … and even then, use it sparingly), be specific about what you want and use a call for the drive to emphasize the contrast between it and the recovery.

Related: Calls to control rush? There’s only so many ways to say “control the recovery” and “slow the slides.” Thanks!!

Another thing I do here is to make a call about getting the hands away together and at the same natural speed (which should be at whatever speed the boat is moving) – usually I’ll say something like “let’s re-establish the ratio, hands away here … hands away here” where “hands away” is said midway(ish) through the drive and “here” is said (aggressively and succinctly) right as they tap down. Tone and inflection are important here but in my experience it really helps to establish a good rhythm through the back end which you can then carry over into the ratio by following it up with calls to stay long, composed, feel the run, stay steady on the slides, etc.

What to look for

When the ratio is off at lower rates you’ll feel (and occasionally see) the boat move backwards a little when the rowers are on the recovery. It’ll also usually feel like you’re rowing at a much higher rate than you are. At higher rates it’ll feel like you’re spinning your wheels and like the rowers are just moving back and forth on the slides without any real purpose.

Effect(s) on the boat

Moving faster on the recovery than you are on the drive will cause check in the boat, which decreases your speed minimizes how much run you’ll get per stroke.

Related posts/questions

The Four Defaults

I say “catch 1,2” a lot to keep ratio but after the catch when they’re on the recovery, why do I want them sliding back slowly? Shouldn’t that be the quick part when they’re actually taking the stroke? Or maybe my coach likes me to say that just because she still wants us taking it slow?

How do you call a ratio shift to control and stop the rush without lowering the SR? Is it even possible?

Coxed a varsity boat today for the first time. I felt awkward, I didn’t know what to say to them other than to make the calls. Normally, with my novices I know what techniques to tell them to change/fix but it’s awky with var. Also, what’s a ratio shift? My stroke today told me to call it, so I did. It’s just another way of saying “down on the recovery,” correct?  Do you have any tips? Thanks!

To see all the posts in this series, check out the “top 20 terms” tag.

Image via // @merijnsoeters