Tag: recovery

Getting off the line with world class speed

Coxing Drills Racing Rowing Technique

Getting off the line with world class speed

This was a talk given by Bryan Volpenhein, former Ohio State and US National Team rower and now current national team coach of the men’s four. He spoke on “getting off the line with world class speed”, which comes down to having the right mentality at the start, staying relaxed at peak speed, and executing a clean shift.

The start defined

We’ve all heard the phrase “you can’t win the race off the start but you can lose it”, not just as a result of your rowing but also due to your mentality. The one singular purpose of the start is to get you into the race. Your specific job is to get the lead and the start is your first opportunity to do that. One of the biggest keys (#majorkey) to accomplishing that is the intent you go to the line with. There can’t be any hesitation or doubt about what you’re going to do – everyone has to be on the same page and know exactly how the next 30-40 strokes are going to be executed. If there’s any hesitation or you’re thinking about what you’re gonna do on the shift or how it’s going to happen or anything other than just straight execution, you’re already at a disadvantage.

This is  huge reason why coxswains MUST call the start consistently and not change the calls on race day or the number of strokes it takes to shift to base, etc. The start must be instinctual for you and the rowers and if your execution here is poor, you’ve gone from being an asset to a distraction in 30 strokes or less. Practicing them on a regular basis and having the discipline to “stick to the script” can help alleviate any uncertainty and allow the crew to become more comfortable with the calls, speed, and, in the case of the rowers, discomfort.

Relaxation with effort

This is a simple concept. Maintaining a sense of relaxation with power and while at speed is all about being loose. Less is more here and patience is the key to both.

At the catch and on the drive the shoulders and hands should stay relaxed while the resistance is felt in the hips and fingers.

Putting the blade in the water should be the result of swinging from the armpits rather than lifting with the shoulders. The catch should be completely free of tension.

The recovery should be an exercise in patience, particularly at high rates like you have off the start. A steady roll into the catch, regardless of rate, should occur naturally by letting the boat run under you rather than relying on the hamstrings to pull you up.

Bottom line – any unnecessary contraction of muscles you don’t need is going to result in a loss of speed.

Practicing the shift

This is one of the most important parts of the race so the execution of it has to be clean by both the coxswain and crew. One of the things that I thought was interesting was what Bryan said about the language they use to describe this chunk of strokes. Rather than call it the “settle” or say “stride”, both of which he considers too passive, he prefers to call it the “shift” because it refers to an active shift in speed to race speed. This communicates the sense that you’re not coming down in speed, you’re maintaining it or trying to go faster by attacking the race at a more sustainable pace.

When you’re calling the shift, the timing of your calls is important for a clean execution by everyone. Something you need to practice and discuss with the crew early on is where in the stroke cycle you’re making your calls. Convention dictates that 98% of your calls are made at the catch but if you’re one of those coxswains who counts their strokes at the finish, you’ve gotta figure out how the shift is going to work if you want the change to happen on the next catch (i.e. if you say “ten” at the finish of stroke 10 and want the change to happen on what would be stroke 11).

Personally I think making calls at the finish and trying to initiate the shift in the span of half a stroke (aka the recovery) rather than across one full stroke (the drive and subsequent recovery) introduces frantic, rushed feeling into the boat’s psyche that could easily be avoided by just spacing out the calls … and, obviously, as I’ve said many times before, not trying to cram too many words into a short period of time. Efficiency applies not just to the rowing but to your calls as well.

Related: Listen to how the shift is called in this race (around the 0:32 second mark), as well as the language used.

Drills to work on the start

Some of the high rate drills Bryan does with the four to help them practice getting off the line include half-slide builders, which help you change direction and get connected without checking the boat (seen below) and reverse ratio placements.

Reverse ratio, which is when you have a full speed recovery and a zero speed drive, isn’t something you typically want to see but in this context it helps the rowers work on body control (setting the bodies quickly) and accuracy at the front end. It also helps you coordinate the recovery sequence when you’re at race pace and eliminate any tension on the drive when the blade is being supported by the water.

Below are some videos that Bryan showed during his presentation and shared with me afterwards that demonstrate what the reverse ratio drill looks like. The first is a stroke by stroke drill, the second and third show the reverse ratio while rowing continuously, and the last one shows their full starting sequence (the splits of which he said were consistently hitting 1:17s).

Image via // Merijn Soeters
Top 20 Terms Coxswains Should Know: Ratio

Coxing Rowing Technique

Top 20 Terms Coxswains Should Know: Ratio

Previously: Rush(ing) || Body angle || Pick drill || Suspension || Skying the blade || Quarter feather || Pin || Run || Lunge || Washing Out || Missing water || Footboard || Check

What part of the stroke/stroke cycle does it refer to

The recovery and the drive, but it’s primarily referenced while on the recovery.

What does it mean/refer to

Ratio is the contrast between the drive and recovery. The standard ratio for rowing is 2:1, which means that the length of time spent on the recovery should be twice as long as the amount of time spent on the drive. To understand why this is necessary, read the first paragraph of #2 in last week’s post on check (linked below). Pretty much everything that’s discussed in the “check” post and the “rush(ing)” post, as well as any of the other posts linked in there, will be relevant to this one.

Related: Top 20 terms coxswains should know: Check and Rush(ing)

As you start rowing at higher rates the ratio is going to get closer to 1:1 (the boat has more momentum so the recovery doesn’t need to be as long) but you can still maintain the same sense of rhythm that you have at lower rates by focusing on letting the boat run under you. Another way of looking at it is letting your feet come to you rather than you moving towards your feet. This ensures a consistent recovery speed by minimizing the chances of you throwing your weight forward or rushing the slides.

Relevant calls

Several of the calls I make for ratio are detailed in the two posts linked below. Another call I recently picked up was “execute some patience”, which refers to keeping the recoveries controlled and consistent.

Related: Top 20 Terms: Run, specifically the “relevant calls” section

You want to avoid generic calls like “slow the slides” or “let me see that ratio” (I hate that call) because they’re not effective and don’t give the rowers anything to go off of. Saying “slow the slides” is just asking for all eight people to slow them down at different times/speeds so if you’re going to make a call like that (which you really shouldn’t unless you’re with a more experienced crew that can infer what you mean from that … and even then, use it sparingly), be specific about what you want and use a call for the drive to emphasize the contrast between it and the recovery.

Related: Calls to control rush? There’s only so many ways to say “control the recovery” and “slow the slides.” Thanks!!

Another thing I do here is to make a call about getting the hands away together and at the same natural speed (which should be at whatever speed the boat is moving) – usually I’ll say something like “let’s re-establish the ratio, hands away here … hands away here” where “hands away” is said midway(ish) through the drive and “here” is said (aggressively and succinctly) right as they tap down. Tone and inflection are important here but in my experience it really helps to establish a good rhythm through the back end which you can then carry over into the ratio by following it up with calls to stay long, composed, feel the run, stay steady on the slides, etc.

What to look for

When the ratio is off at lower rates you’ll feel (and occasionally see) the boat move backwards a little when the rowers are on the recovery. It’ll also usually feel like you’re rowing at a much higher rate than you are. At higher rates it’ll feel like you’re spinning your wheels and like the rowers are just moving back and forth on the slides without any real purpose.

Effect(s) on the boat

Moving faster on the recovery than you are on the drive will cause check in the boat, which decreases your speed minimizes how much run you’ll get per stroke.

Related posts/questions

The Four Defaults

I say “catch 1,2” a lot to keep ratio but after the catch when they’re on the recovery, why do I want them sliding back slowly? Shouldn’t that be the quick part when they’re actually taking the stroke? Or maybe my coach likes me to say that just because she still wants us taking it slow?

How do you call a ratio shift to control and stop the rush without lowering the SR? Is it even possible?

Coxed a varsity boat today for the first time. I felt awkward, I didn’t know what to say to them other than to make the calls. Normally, with my novices I know what techniques to tell them to change/fix but it’s awky with var. Also, what’s a ratio shift? My stroke today told me to call it, so I did. It’s just another way of saying “down on the recovery,” correct?  Do you have any tips? Thanks!

To see all the posts in this series, check out the “top 20 terms” tag.

Image via // @merijnsoeters

Coxing Drills Masters Q&A Rowing Technique

Question of the Day

I recently had an anxiety attack in the boat (they didn’t notice and it was still safe). Part of the reason may have been because I’m not sure what to say. I’m good at short calls but as a junior coxing adult men (average age 45) I lack the confidence to make long calls and exercises that weren’t given to me. Do you have any suggestions of calls I could start with? We have been focusing on control on the slide and finishes. 🙂 Thank you!

Regardless of whether anyone noticed or not, coxswains having an anxiety attack in the boat isn’t safe, no matter how minor it is. It’s just not. I have anxiety (and panic attacks) too so I know it’s not something you have a lot of control over but that’s part of the problem – you don’t really have any control over what’s happening, which is also what tends to exacerbate some people’s anxiety in those situations, and it can leave you feeling distracted, dizzy, etc. (neither things that you want your coxswain to be feeling ever).

I’ve heard several stories from coaches about people having panic attacks in the boat and it can go from relatively minor and “I’m OK *deep breath* I’m OK…” to pretty serious and “We’ve gotta get him/her outta the boat now” (which they’ve gotta try to do while the person is sitting there having a combined panic/asthma attack). It’s just not something that you want to risk have happening, for the sake of that person especially, but also for the rest of the crew. You also don’t want to have  your entire practice derailed either because of it but most people tend to not want to say that out of fear of being seen as “insensitive” to the issue (even though that’s a legitimate concern).

Not to minimize your situation but if you’re having an anxiety attack in part because you’re not sure what calls to make, as a coach, that would make me question your ability to handle being a coxswain in general or at the very least, your ability to cox a masters crew. Before you do anything else though I would really advise you to talk with the coach of that crew (if you haven’t already) and let him/her know that coxing them is intimidating to you and either figure out a plan for the two of you to communicate more on the workouts or to find another coxswain who can handle working with them. Jumping from coxing high school crews to masters can be tough at first and not everyone is cut out for it. It doesn’t mean you’re a bad coxswain or anything if you’re not but if it’s becoming too overwhelming to the point where you’re having a panic attack (or multiple attacks) while you’re on the water over something as simple as making calls, you really owe it to them to relinquish the seat to someone who is better equipped to cox them.

As a junior, assuming you’ve been coxing for three years now, you should have a solid arsenal of calls and drills in your back pocket that you can pull out if/when you need them. The coach should obviously let you know what he wants to do that day but he shouldn’t need to spoon-feed his coxswain every workout he wants done, drill he wants called, or call he wants made. If that’s what he has to do he might as well take out coxless small boats.

I’m not sure if by exercises you meant the actual workout or drills so I’ll try to hit both of those. Workouts are completely dependent on your crew’s training plan for the week (assuming you have one). When in doubt if you aren’t given a workout to do with them or you’re sent off on your own and told to put them through something, just do a long steady state piece, particularly if you’ve been focusing a lot on technique lately. 2×20, 3×15, at 18-22spm etc. are good ones to do.

As far as drills go, double pause drills are great for slide control (I like to pause at hands away and 1/2 slide) as are exaggerated slides, assuming your crew is skilled enough to row with good technique at borderline-obnoxiously low stroke rates (think 12-14spm). Catch-placement drills are another fun drill to do that help work on slide control. The main focus is on catch-timing (hence the name) but moving the slides together on the recovery is obviously a pretty big part of that.

When I make calls for the recovery/slide control, I like to draw out whatever I’m saying and get them to match their recovery length to the length of whatever I’m saying. I’ll say “relax”, “control”, “smooth”, “long”, “patience”, etc. for about three strokes, which gives the stroke a chance to match up his slide speed with my voice and for everyone else to fall in line with him. From there I’ll call it like that as I need to. The biggest thing I try to remind them of is that in order to have any forward momentum, they’ve got to have good ratio. You can’t have good ratio unless you’re patient on the recovery.

Another thing to remind them is that on the recovery they shouldn’t be pulling themselves into the catch or really doing that much work at all; all you’ve gotta do is let the boat run under you. If you looked out of the boat at the shoreline while on the recovery it should almost look/feel like you’re not even moving because you’re letting the boat do all the work.

For the finish, it depends on what you’re working on – clean releases, getting a good send at the end of the drive, etc. For clean releases, simple square-blade rowing is probably the most basic drill you can do because all you’ve gotta do is apply weight with the outside hand to extract the blade. You could also do this with the outside hand only if you wanted. Posture is critical when working on finishes too so make sure that’s something you’re making calls for.

Another drill is rowing with feet out since you’ve gotta have a solid finish with the arms to help you maintain your connection to the stretchers on the last part of the stroke. It’s not strictly a “finishes” drill but my coaches have always used it to help enforce good finish posture in my boats when we’ve been working on that part of the stroke. If you’re working on building power throughout the drive and finishing the stroke off with the max amount of send, you could do half-pressure catches building into full-pressure finishes. Not only does that work on quick catches but it also helps them feel the acceleration on the drive, all culminating in a full-pressure finish.

Coxing Drills Q&A Rowing Technique

Question of the Day

I say “catch 1, 2” a lot to keep ratio but after the catch when they’re on the recovery, why do I want them sliding back slowly? Shouldn’t that be the quick part when they’re actually taking the stroke? Or maybe my coach likes me to say that just because she still wants us taking it slow?

After the catch … you mean the drive? The drive is when where they’re taking the stroke and the recovery is when the blade is out of the water and they’re sliding forward into the catch. You wouldn’t count out “catch 1, 2…” on the drive though because that’s “fast” part of the stroke when the blade is in the water. Ratio is always 2:1 or 3:1, meaning that the recovery is two to three times longer than the drive.

Related: There’s a lot of like, I don’t know how to describe this really, lurching in the boat? Because I think the girls slide forward to fast and that makes us go back instead of forward if that makes sense. how would you correct this? Thanks!

When you take it slow like that, are you rowing with any kind of pressure? The only time I can think where I’ve had an exaggerated drive instead of an exaggerated recovery is when we’ve done rushed-recovery drills. They work on having quick catches because you’re taking no time on the recovery. The drive, on the other hand, is slow and there’s no pressure on the stroke – you’re basically reversing the ratio, so instead of it being 3:1 it’s now 1:3. Does that sounds like what you’re doing? If that’s not it, then I’m not sure what your coach is having you do. I’d definitely ask for clarification though so you’re sure you’re communicating the right stuff to the crew.