Tag: starts

Question of the Day

By readyallrow April 20, 2017

Hi! Do you have any suggestions for what my boat can do about our struggles coming out of a start? We’ll usually do a start 6 and a high 20/25, but when we need to lengthen out to get to race pace (because we can’t hold a 42 SR for the whole 2000m) we seem to lose a lot of energy and ground on other boats. What can we do to come out of a start more smoothly? My boat is fairly strong and it’s not that we’re dropping from a 1:35 to a 1:50 because we can’t hold a lower split, but we just don’t know how to lengthen out/get a ratio shift that’s more smooth and even. Calling a lengthen 10 doesn’t help. Thanks!

Unless the ratio is actually that out of whack off the start, a ratio shift is the wrong approach.

Have you tried doing a sub-settle and then settling again to your base pace? This has always worked well for my boats (both coxing and coaching) when we’ve had similar issues. If we’re starting high (in the 40s) and trying to get to a 34-35, more often times than not it’d feel like we were putting the brakes on in order to hit the 34, causing us to lose ground and momentum, rather than just gradually lengthening out to it while still maintaining the power we had in the high strokes. Once we tried doing a sub-shift to a 38ish and then 5-7 strokes later shifting again to base, that seemed to alleviate a lot of the issues.

Even before we started incorporating the sub-shifts, we’d spend a lot of time on the transition during practice, not just on the strokes themselves but on the calls too. For me the focus was always on the last three strokes of the high strokes and the first stroke out of the shift, just making sure my calls were clear and on point so that first stroke was smooth but still deliberate and powerful. If I was sloppy here I could feel the drop in energy over the next few strokes. Another point of emphasis was on staying loose – if you’re tense then you’re not going to be able to flow in sync with the boat, which was one of the things that contributed to that “hitting the brakes” feeling for my crews.

Talk with your coach and try to make this a point of practice each week. One of my coaches always had us do starts at the end of practice when we were tired and more likely to row with not-the-greatest technique, which actually helped a lot because it made us focus more on staying loose and taking clean strokes. I think making that snap transition between fatigued from AT pieces to clear-headed and calm before doing a start also helped us manage our adrenaline better during races, which played into that shift down to base pace being smoother and less frantic.

Coxing Drills Racing Rowing Technique

Getting off the line with world class speed

By readyallrow May 5, 2016

This was a talk given by Bryan Volpenhein, former Ohio State and US National Team rower and now current national team coach of the men’s four. He spoke on “getting off the line with world class speed”, which comes down to having the right mentality at the start, staying relaxed at peak speed, and executing a clean shift.

The start defined

We’ve all heard the phrase “you can’t win the race off the start but you can lose it”, not just as a result of your rowing but also due to your mentality. The one singular purpose of the start is to get you into the race. Your specific job is to get the lead and the start is your first opportunity to do that. One of the biggest keys (#majorkey) to accomplishing that is the intent you go to the line with. There can’t be any hesitation or doubt about what you’re going to do – everyone has to be on the same page and know exactly how the next 30-40 strokes are going to be executed. If there’s any hesitation or you’re thinking about what you’re gonna do on the shift or how it’s going to happen or anything other than just straight execution, you’re already at a disadvantage.

This is huge reason why coxswains MUST call the start consistently and not change the calls on race day or the number of strokes it takes to shift to base, etc. The start must be instinctual for you and the rowers and if your execution here is poor, you’ve gone from being an asset to a distraction in 30 strokes or less. Practicing them on a regular basis and having the discipline to “stick to the script” can help alleviate any uncertainty and allow the crew to become more comfortable with the calls, speed, and, in the case of the rowers, discomfort.

Relaxation with effort

This is a simple concept. Maintaining a sense of relaxation with power and while at speed is all about being loose. Less is more here and patience is the key to both.

At the catch and on the drive the shoulders and hands should stay relaxed while the resistance is felt in the hips and fingers.

Putting the blade in the water should be the result of swinging from the armpits rather than lifting with the shoulders. The catch should be completely free of tension.

The recovery should be an exercise in patience, particularly at high rates like you have off the start. A steady roll into the catch, regardless of rate, should occur naturally by letting the boat run under you rather than relying on the hamstrings to pull you up.

Bottom line – any unnecessary contraction of muscles you don’t need is going to result in a loss of speed.

Practicing the shift

This is one of the most important parts of the race so the execution of it has to be clean by both the coxswain and crew. One of the things that I thought was interesting was what Bryan said about the language they use to describe this chunk of strokes. Rather than call it the “settle” or say “stride”, both of which he considers too passive, he prefers to call it the “shift” because it refers to an active shift in speed to race speed. This communicates the sense that you’re not coming down in speed, you’re maintaining it or trying to go faster by attacking the race at a more sustainable pace.

When you’re calling the shift, the timing of your calls is important for a clean execution by everyone. Something you need to practice and discuss with the crew early on is where in the stroke cycle you’re making your calls. Convention dictates that 98% of your calls are made at the catch but if you’re one of those coxswains who counts their strokes at the finish, you’ve gotta figure out how the shift is going to work if you want the change to happen on the next catch (i.e. if you say “ten” at the finish of stroke 10 and want the change to happen on what would be stroke 11).

Personally I think making calls at the finish and trying to initiate the shift in the span of half a stroke (aka the recovery) rather than across one full stroke (the drive and subsequent recovery) introduces frantic, rushed feeling into the boat’s psyche that could easily be avoided by just spacing out the calls … and, obviously, as I’ve said many times before, not trying to cram too many words into a short period of time. Efficiency applies not just to the rowing but to your calls as well.

Related: Listen to how the shift is called in this race (around the 0:32 second mark), as well as the language used.

Drills to work on the start

Some of the high rate drills Bryan does with the four to help them practice getting off the line include half-slide builders, which help you change direction and get connected without checking the boat (seen below) and reverse ratio placements.

Reverse ratio, which is when you have a full speed recovery and a zero speed drive, isn’t something you typically want to see but in this context it helps the rowers work on body control (setting the bodies quickly) and accuracy at the front end. It also helps you coordinate the recovery sequence when you’re at race pace and eliminate any tension on the drive when the blade is being supported by the water.

Below are some videos that Bryan showed during his presentation and shared with me afterwards that demonstrate what the reverse ratio drill looks like. The first is a stroke by stroke drill, the second and third show the reverse ratio while rowing continuously, and the last one shows their full starting sequence (the splits of which he said were consistently hitting 1:17s).

Image via // Merijn Soeters

Coxing How To Racing

Coxswain Skills: Race Steering

By readyallrow March 29, 2016

Previously: Steering, pt. 1 || Steering, pt. 2 || Boat feel || How to handle a negative coxswain eval || How to cox steady state workouts || How to cox short, high intensity workouts

It’s officially racing season which means your steering is going to be under heavy scrutiny for the next ten weeks. If you steer a straight course you’re not going to get any recognition (and if you do it’s minimal) but any slight deviation towards one buoy line or the other will likely draw the ire of your rowers and/or your coach, depending on their vantage point. You’ve got a lot of “number one” jobs on race day but steering straight is THE number one priority of all your “number one” priorities so make sure it’s a skill you’re honing every day at practice.

Related: How to steer an eight

Steering during a race is, for the most part, exactly the same as steering on any regular day, at least in my opinion. There are very few things I do differently and the things I am doing differently are simply a result of my heightened levels of awareness. One of the hallmarks of steering is that the speed in which the hull responds to the rudder is directly proportional to the speed of the hull itself. The faster you’re going, the faster it’s going to respond to you making adjustments which means that your adjustments have to be that much smaller in order to avoid oversteering and serpentining your way down the course.

One thing that helps avoid oversteering is making sure you’re holding the strings correctly. Don’t just grip them with your full fist like you’re holding a broom handle or something – you’ve got to ground yourself in some way to the boat otherwise you’re not going to know when you’re making conscious adjustments or when your hands (and in turn, the rudder) are reacting to the boat surging, falling off keel, etc.

This is how I grip the strings when I’m coxing. I didn’t do it here because it would have been impossible to take the picture but in addition to positioning my fingers like this, I also hook my pinkies over the gunnels. This forces me to make millimeter adjustments at a time and nothing more, which is great for when we’re doing straight-shot pieces or I’m racing. If I want/need to make a larger adjustment then I have to take my pinkies off the gunnels and since 99.9% of my steering these days is auto-pilot, that conscious movement of moving my finger “wakes me up” to the fact that I’m steering and forces me to evaluate why I’m doing it.

(During a regular practice I don’t hook my pinkies unless we’re doing pieces, mainly because I have small hands and it’s uncomfortable stretching my finger like that for an hour and a half. If you’re working on limiting how much you hit the rudder though you should spend more time with your pinkies hooked than unhooked.)

That aside, it’s time to think about how steering is integrated into your race plan. The most trouble you’re going to have with steering during a race is going to come in the first 3-5 strokes and this is usually a result of sloppy bladework by the rowers. If they’re trying to muscle the boat off the line instead of taking clean, crisp strokes then the boat is going to be offset and your point will get thrown off.

If conditions are poor (wind, chop, etc.) then this will only exacerbate the amount of steering you’ve gotta do. The only way to try to avoid having this happen is to practice your starts and make sure those first few strokes are clean and together before you add the power in the fourth and fifth stroke. The calls you make here should emphasize this too.

We have a five-stroke start and last year our varsity coxswain would call it as “pry, complete, complete, accelerate, go“, where “pry” = light on the seats, pick the boat up out of the water, “complete” = hold the finishes, complete the strokes (aka don’t get so amped that you’re just throwing water around), “accelerate” = start adding power, and “go” = full commitment with the legs, time to haul on it. The more time you spending getting those first five strokes down (or however long your start is), the easier it’ll be on race day to get off the line with minimal touches on the rudder.

Don’t be afraid to tell the rowers too that the cleaner the start the less you’ll have to steer off the line. I’ve said this numerous times but I have no problem telling my crew that if they want me to not steer during a race then I expect them to take good, clean strokes so I don’t have to steer. I’ll take full responsibility for the other 195ish strokes but they’ve gotta work with me on the first five. I know I can hold a straight point without thinking about it so the less distracted I am by having to think about where I’m going, the more I can focus on executing the race plan.

The last thing to think about is the buoys, assuming the course you’re on has them. I’ve touched on how to get a point on buoyed courses before but ultimately it’s up to you to figure out what strategy works best for you. Some coxswains rely on their peripheral vision to maintain an even spacing between the shell and the buoys on either side of them, others focus on where the buoys converge on the horizon (aka their stroke’s head) and just aim straight towards that.

There is no right or wrong strategy so utilize the time you have to practice on the course (if you have any) to see which one is easier for you. The first time I steered a buoyed course my coach told me to just go out and steer like I would if there weren’t buoys there and this allowed me to do whatever came naturally when it came to holding a point rather than explicitly focusing on where the buoys converged or where they were on either side of me in relation to the shell.

Not having buoys, while annoying, isn’t the end of the world. Like I said at the beginning, the only differences in my steering on race day is that I’m more aware of and subtle about my adjustments. That’s basically the “trick” for steering on an un-buoyed course. Grip the strings like I showed earlier, pick a point off the starting line (or aim at the markers at the end of the course if there are any – i.e. on the Charles there are 8ft tall lime green markers strapped to the trees on the Boston side across from the BU boathouse), and only make millimeter adjustments as necessary or as dictated by the weather conditions/bladework.

Image via // @rowingcelebration

Coxing Drills Racing Rowing Technique

The Language of the First 500

By readyallrow March 24, 2015

A couple weekends ago I had the opportunity to go to the What Works Summit that’s hosted each year by the IRL program at CRI. The theme this year was “The First 500” and each speaker created a presentation that related in some way to that theme. For the most part I’m writing everything below as it is in my notes so while I’ve completed some of the thoughts, some of it is still in shorthand.

The first presentation I went to was given by Yaz Farooq, current head coach of Stanford’s women’s program and former national team coxswain in the 90s. She spoke on “the language of the first 500”, managing the transition strokes, and knowing how to balance focusing on your speed and communicating your position relative to the other crews.

Breaking down the start from a language perspective

What does the start look like and what are it’s core components?

Start sequence to get out of the blocks → high stroke sequence → lengthen → lengthen again to base

The first lengthen is what you might know as the “settle” but as Yaz said, most programs are starting to move away from calling it that and instead are focusing more on calling it the “lengthen” or the “sub-lengthen”. The thought behind this is you’re not really settling so much as you’re trying to maintain as much boat speed as possible while transitioning to a more sustainable pace. It’s one of those subtle changes in language that, in theory, has a more positive effect on the psychology of the crew. (Regardless of whether you use “lengthen” or “settle” though, pick one and stick with it.)

How do you break it all up?

Based on strengths/weaknesses of the team, how well they handle the high strokes (i.e. how efficient they are at high rates), and how powerful they are.

Scripting out the starting sequence

First and most importantly, have a plan and map it out. This is the only area of the race that is really worth scripting (in addition to maybe the sprint depending on how your team approaches it).

How many strokes do you need to get off the line, how many high, how many to lengthen, how many base, etc.

Assign key words – these are things the coxswain would say to reinforce the rhythm and make sure it’s as effective as it can be. They key here is to have technical themes assigned, possibly emotional or philosophical themes based on team beliefs that the crew can lock into. Instill these themes throughout practice so coxswains can set up attacks with key words/phrases that reference each theme (without monologuing). Having key words/phrases attached to each theme results in no confusion and everything is clear because it’s been practiced daily.

When possible, reinforce the rhythm with your voice to support it and/or get it to where it needs to go. For a standard five stroke starting sequence (1/2, 1/2, 3/4, full, full):

Squeeze, direct, build, lengthen, full

Grip, lock, lock, lengthen, full

Complete, direct, grip, lengthen, full

Drills to work on the start

These drills, if done with multiple crews, should be done leapfrog style so each crew can watch/cheer for each other. Remember to be patient when something isn’t working. Talk it out with your crew until you find what works for you. I always talk with my stern pair first when something doesn’t work but it’s important to make sure you talk with the entire crew and consider/incorporate everyone’s feedback into whatever changes you make.

Stroke-by-stroke start drill

The goal is to perfect the sequence and bladework.

First stroke done from a dead stop.

Stroke 1 + 2 done from a pause.

Strokes 1 + 2 + 3 done from a pause.

First five done from a pause.

First ten done from a dead stop.

The first stroke is heavy but you get to keep perfecting it and improving the strokes by doing them one at a time and building up through the entire sequence.

Example: If your start is the standard “half, half, three-quarters, lengthen, full” followed by high strokes…

Half stroke done from a dead stop. When this stroke is done, pause at half slide. Hold the pause long enough for the crew to collect themselves and the boat to set up but don’t hold it forever. Two seconds or so max.

Half, half done from a pause. Again, pause at half slide when finished.

Half, half, three-quarters from a pause. Again, pause at half slide when finished.

Half, half, three-quarters, lengthen, full from a pause. Let it run when finished, balance the boat, weigh enough, and check it down.

Half, half, three-quarters, lengthen, full + first five high strokes from a dead stop. Let it run when finished, balance the boat, and weigh enough.

4-6-8 drill

Starts are done by 4s, 6s, and all 8. Goal is to learn how to use your legs and complete each stroke. The boat is heavier when rowing by 4s and 6s so you don’t want to wail on the oar right away otherwise you won’t be able to hold on to the water and ultimately your strokes will be short and ineffective.

Example:

Stern 4 goes through the starting sequence (just the first five strokes). When finished, let it run, weight enough, and check it down.

Bow 4 ” “

Stern 6 ” “

Bow 6 ” “

All 8 ” “

Square blade starts

Goal is to complete the strokes. Can do the entire starting sequence straight through or do each stroke individually as with the stroke-by-stroke start drill. Best to start off stroke-by-stroke and then progress to doing them straight through the further into the season/more experienced you get.

Striking a balance between speed + rhythm and position

Ultimately what you’re shooting for (as the coxswain) is striking the right balance between getting your crew off the line effectively and letting them know where they are relative to other crews.

How much time do we spend focusing on boat speed/rhythm and how much on when/how to communicate the crew’s position?

It depends on the team and skills of the coxswain. If it’s the early part of the season or your coxswain is a novice, focus solely on execution. This may evolve throughout the season though.

Example: At the beginning of the season, Stanford coxswains don’t tell positions until they lengthen to base so everyone can focus on nuances of each phase of the start. By NCAAs the coxswains will communicate as much info as they feel is relevant at the time but the focus remains on the execution of each phase of the start.

Managing the transition strokes

The goal when transitioning from your starting pace to base pace is to maintain boat speed and keep the intensity on while getting the rating down to a more sustainable number. One of the most important parts of managing the transition strokes efficiently and effectively is to set them up and call them consistently. Find a set of calls that work for you, your crew, and what you’re trying to accomplish and then stick with it.

The “traditional” thing to do when calling transition strokes was to lengthen in one beat but now it’s becoming more common to transition over 3-5 strokes depending on how much the rate is coming down. A good habit for coxswains to get into is to say the rate as you’re lengthening, especially early on in the season. (This isn’t as necessary as the season progresses but ultimately it’s dependent on what the crew wants/needs. Personally I think it’s something that’s important to do regardless of what part of the season you’re in but it all goes back to what will help the crew the most.)

Good calls for this part of the start are “push the spacing” or “push the puddles” because it’s something the rowers can both feel and see.

Practice the transitional cues during practice so when anxiety takes over (during their first big race, at the national championships, etc.) you can use those calls as a fall back that they can rely on to be part of your plan in order to get everyone focused in on the same thing and moving/transitioning together.

Make it clear to the crew that they have to establish a solid base rhythm before the coxswain tells them where they are, that way they’re not tempted to rush the transition to base just to find out where they are. It’s important for the coxswain to reinforce and make sure they get to a sustainable base rhythm that mimics what you’ve practiced and worked on so the crew’s not distracted. You’ve got to establish the rhythm before relaying information, not the other way around because otherwise it becomes about the other crew and the people in your boat/their rowing gets frantic.

What should you look for when looking for a “solid base rhythm”?

When you practice your base rate during practice the rowers would know to a certain extent how it should feel based on the coach and coxswain’s feedback. This includes hitting a certain split (i.e. your “sweet spot” when everything just seems to naturally fall into place and come together), feeling like you’re able to get to full slide (coxswains, this is where it’s important to communicate with your stern pair so you can find out if this is happening or not), the stroke is leading the rhythm and everyone else is following and supporting it (again, talk with your stroke…), each end of the stroke is clean, and the rhythm has that “swing” feel to it rather than a “back and forth” rhythm.

Image via // @ryanjnicholsonphoto

Video of the Week

Video of the Week: 2004 Men’s 8+ Starting Sequence

By readyallrow November 3, 2014

College Coxing Racing Recordings

Coxswain recordings, pt. 16

By readyallrow January 9, 2014

Sacramento State Start Lake Natoma Invite

This is a short clip that gives a good example of how to call a start. I’m not a huge advocate of counting down the strokes unless it’s two or three strokes leading into a move or stride (i.e. “let’s shift in three … in two … in one, now…”) but that’s beside the point in this particular recording. The takeaway here is her tone and how she delivers her calls – sharp, quick, and concise.

Bucknell Men’s Novice 8+ Grand Final ECAC New England Championships

https://www.youtube.com/watch?NR=1&feature=endscreen&v=d14Y4JzmsRM

Overall this is a good recording for a freshman/novice race. He starts off the first 500 by spending a lot of time noting their position on the other crews, which on one hand is good that he’s giving his boat that information but there’s definitely a better way to present it. You don’t want to put all your energy into talking about the rest of the field because that takes the focus away from your boat, which is the number one priority. You want to make sure you’re throwing down a clear, established rhythm right as you settle to your base pace and then once you’ve got the boat running and swinging well, that’s when you can start shifting your focus to how the race is evolving around you.

At 1:25 when he’s building into their upcoming move, it feels super frantic when he yells “get the bow ball ahead”. I get what he’s going for but I think this could have been executed a little cleaner. The subsequent calls though are good.

As the race goes on, he’s doing a great job of telling the crew where they’re at on the rest of the field … which I know is contrary to what I said earlier but the difference is that now is actually the appropriate time to be making all those calls. You hear him talk about how close they are to Michigan and Ithaca right before and right after they cross the thousand – that would have been the opportunity to shut them down with a move. When you’ve got crews that are half a seat or one seat off of you, you’ve gotta shift your priorities from whatever you’re currently doing to putting them in your rearview mirror for good. You don’t want to be on the losing end of that seat race once the other crew finally decides they’re sick of you guys sitting on each other.

Last thing to point out – look at the courses of each of the coxswains as they’re coming down the course. Trinity was swerving a bit in the last 250m or so, which probably/definitely cost them a seat or two. You can see Bucknell and BC doing the same around 5:00 and in the last 10-15 strokes, respectively.

Other calls I liked:

“Our race to win…”

You can find and listen to more recordings by checking out the “Coxswain Recordings” page.

Coxing How To Q&A Racing

Question of the Day

By readyallrow March 23, 2013

Do you have any advice on coxing starts without calling out the fractions or counting out every stroke? They happen so quick that it’s hard for me to squeeze in useful calls for my rowers.

The whole start (starting four or five, high strokes, and settle) takes about a minute (ish) to get through. After that you can make all the calls you want but until that point, executing the start is more important than whatever else you might say. Rather than saying “1/2, 1/2, 3/4, full” and trying to cram words in between each one, pick one or the other to do. Either call the fractions or say something like “pry send, complete, complete, lengthen, full…” but don’t do both. If/when you make calls, they should be short, monosyllabic words that are quick and easy to say. It’s easy to trip yourself up if you try to say too much so just focus on keeping it simple.

If you need some inspiration, listen to the recordings I’ve posted and hear how those coxswains do their starting calls. That should give you an idea of how you might do it.

Coxing Recordings

Coxswain recordings, pt. 3

By readyallrow December 7, 2012

Australian Men’s 8+ at the European Training Center

Not too much in this video since it’s only about a minute long but I wanted to point out how he gives them something to focus on (“length and power through the water”) even though they’re at the tail end of practice and taking it back to the dock. It’s really easy to assume practice is over when your coach says to bring it in but it’s not so you should be taking advantage of whatever time you have left to get in as many good strokes as possible so you can end practice on a high note. This is particularly important if the rest of practice was mediocre or didn’t go well.

Other calls I liked:

“With hips, this one…”

“Lets set ourselves up for the row home…”

“One continuous focus to the end…”

Texas Rowing Center Rowing Starts

One thing she says that I remind my crews of a lot is that you have to row well even when you’re tired, otherwise your chance of getting injured or tweaking a muscle goes way up. Another thing she does that I do too is the “BOOM” at the start of a shift. When racing, I would do it on the first stroke of our settle after our high strokes at the start. The aggressiveness in your voice helps to reiterate the fact that the “settle” doesn’t mean there should be a drop in power.

I like the authoritativeness in the commands during the tens but outside of those strokes she sounds bored (or annoyed), like this is what she’s been doing all day and she’s over it. That’s something you have to pay attention to because whatever energy you’re projecting through your tone will get picked up by the rest of the boat and that can either make a good practice better or a mediocre practice worse. You can keep your tone chill and conversational but it should never get to the point where it sounds like you’re just going through the motions.

You can find and listen to more audio by checking out the “Coxswain Recordings” page.

Coxing Video of the Week

Video of the Week: Rowing Starts

By readyallrow November 19, 2012

Coxing How To Novice Q&A Racing

Question of the Day

By readyallrow November 13, 2012

Hi! I will be doing a 2000m race with my crew tomorrow. I’m my team’s coxswain. It will be my second race, but my first 2000m race. I understand steering and such, and I know what calls to make for technique, and I know our starts, but my coach hasn’t really gone over the race itself, I guess. What I’m trying to say is that I need some guidance on how the race should go. Also, stake boats terrify me. Any help you can give me would be amazing!

Stake boats aren’t as scary as they seem. Have you practiced them at all during your practices? The best way to figure out how to do it is to practice it with your coach. Have them (or a teammate) lie stomach down on the launch (which should be sitting stationary, obvs) and act as the stake boat-holder, while you row up and try and back it in. It’s not going to be EXACTLY the same because you’ll have the current of the river moving the launch as well as the boat, but it gives you a GREAT sense of how to do it. Plus, your coach can see exactly what you’re doing and give you pointers on how to correct it.

Here’s a pretty good video that explains a lot about how to get into the stake boats.

As for everything else … it’s pretty straightforward. You row up to the start, get locked on, and go. It’s a straight 2k (I’m assuming) so you won’t have to worry about steering around curves or anything. You want to steer as little as possible so pick a point in the distance and keep it right off your stroke’s ear or shoulder and shoot for that down the course.

Pay attention to what they tell you about the starting call in the coxswain meeting. They’ll either do a quick start (“Attention, GO!”), a countdown start (“5, 4, 3, 2, 1, attention, GO!”), or a polling start (“Harvard, Penn, Cornell, Dartmouth, Cal, we have alignment, attention, GO!”). If it’s very windy or the weather isn’t great, they’ll most likely do a quick start, otherwise they’ll probably stick with a countdown start. That’s been my experience anyways.

Last minute tips:

As soon as you get locked onto the platform and start getting your point, raise YOUR hand and have your bow raise THEIR hand. Unless the marshal’s say they aren’t recognizing hands, they cannot start the race until everyone’s hand is down. If they’re standing on a platform above where you are, it’s easier for them to look down and see the bowman’s hand than it is to see yours, so make sure they’re both in the air.

Find out what the rule is about breakage. Typically if it’s in the first 100m, they’ll call all the boats back to the platform. Breakage has to be legitimate, like a wheel came off the seat or the oar broke. Oarlocks that aren’t closed, crabs, or popping a slide don’t count as breakage.

Also find out what the rule is about flags. Typically they use a white flag to signal the start. In my experience, we were told to go on the flag drop, NOT the call “GO”. If the flag drops before you hear “go”, you can start. Find out the rule for your specific regatta though.

Take a deep breath at the starting line and shake out your shoulders. RELAX!! 2ks are the best kinds of races in my opinion. I’d choose a sprint race over a head race 10 out of 10 times. There’s probably a million other things I could suggest but I don’t want to overwhelm you too much! Have a great time and good luck!!