Category: Rowing

Question of the Day

By readyallrow May 20, 2014

I’m brand spanking new at coxing. I’m an indoor rower instructor, where correcting form and giving cues is based on having a good view of body position. As a cox, I don’t have the body cues of my crew to help me (beyond my stern seat.) I know paddle height and timing should be telling me what I need, but I’m having a hard time interpreting what I’m seeing into form correction. Any thoughts you could share are appreciated!

Kayakers use paddles, rowers use oars. “Stern seat” is called “stroke”.

As a coxswain, in general you should be less concerned with correcting the bodies and more focused on the things you can see like bladework, timing, puddles, etc. Anything specific regarding the bodies will most likely be individual in nature and come straight from the coach since they have an easier time seeing those kinds of things. You should pay attention to what they’re saying to the rowers or crew as a whole so you can make “reminder” calls as necessary but the majority of your “body calls” are going to come from things you’ve heard the coach say, observations you’ve made on land, etc. and less so from direct observations while you’re coxing.

Just to clarify, I consider “body calls” to be about 99% related to posture and nothing else. Things such as handle heights, for example, are straight technique calls for me because I don’t need to see the body to know what the hands are doing since I can see the oars right in front of me. If something relating to posture is resulting in poor handle heights then I’d normally rely on the coach to make that call before I start postulating from several seats away what the exact issue is.

Now that I’ve been coxing for awhile I can typically make those calls on my own and be right or at least in the ballpark the majority of the time but when I was a novice I’d wait for my coach to make the call and then eventually incorporate the things he said into my own calls during practice, pieces, races, etc. once I had a solid understanding of the issue. Usually he’d go over with me after practice what he saw, why he said what he said, why this is the correction he had them make, etc. and then give me a day or so to process everything before asking me (spur of the moment) to explain it all back to him.

Most of the time it’d be on the water and he’d say “Kayleigh, if you were me, what would you say to Abby in order to correct the problem she’s having with missing water at the catch?” or something along those lines. When I could explain it back to him on the spot, in detail, and in front of my teammates proficiently enough, that is when he’d allow me to start making calls and corrections relating to that issue on my own. This demonstrated to him (and to an extent, my teammates) that I wasn’t just wildly guessing at what might be causing the problem, rather I was making a fairly certain educated guess on what was happening based on what I knew about the stroke, what I knew the rower’s tendencies were, and what the typical corrections were for that or similar issues. When making any kind of calls for the body, having the memory of an elephant helps a ton.

Poor timing is less about body position and more about just being too slow or too fast on the recovery. It can be because of other things but those are the more common reasons. Oar height is related to handle heights. If the blade is up in the air (known as “skying”) then the hands are too close to the legs on the recovery and/or feet at the catch. If the blade is barely off or dragging on the water then the rower most likely didn’t tap his hands down at the finish, meaning the hands are too high. The collection point for the finish is around the belly button/bottom rib so pulling in to this point should give you a solid couple of inches to tap the blade out. When they come away on the recovery the blade should be about six inches off the water to allow for a direct catch with little to no missed water. (If you have more specific questions – i.e. you’re seeing this, what does it mean, how should it be corrected, etc. – feel free to email me.)

Have your coach take a camera out on the water with him and try to get some video of the crew rowing if you want to learn more about what the rowers bodies look like and the corrections they need to make. Also ask if you can ride in the launch one day if you’ve got another coxswain who can switch in for you. I would say though that if you’re just coxing recreationally or as part of a learn-to-row program and not as part of a competitive team, don’t over-think things and try to find a solution to every problem right off the bat or think that every technique error is strictly related to something going wrong with the bodies. (I wouldn’t recommend doing that even if you are coxing competitively…) Just go out, have fun, and steer the boat. Let your coach do the coaching and just listen to what he/she is saying until you become proficient enough to make the calls yourself.

I went out a couple times with some of the adult classes when I coached at CRI and there were few things more irritating than trying to coach a boat with this one rower who knew pretty much nothing about rowing but thought they knew everything because they’d just recently been certified as an indoor instructor. Whenever they’d get in the coxswain’s seat they’d try to make all these grand observations and corrections but all it did was confuse the other rowers, waste time, and piss the coaches off. Input and communication between the coach and coxswain is great and pretty crucial but when you’re just starting out, the best thing you can do is just listen and develop a better understanding for the stroke before trying to make corrections on your own. One of my coaches used to say “you coach the blades and I’ll coach the bodies” and that worked well for us because I coached what I could easily see and he did the same without either of us interfering with the other. We’d both listen to what the other was saying and factor that into the calls we were making but for the most part, I was responsible for coaching/correcting the bladework and he focused on coaching and correcting the body positions.

Coxing How To Racing Rowing

How to Manage Your Race Day Warmups

By readyallrow May 20, 2014

The warmup that you do when heading to the starting line shouldn’t be that different from the regular routine you take your crew through during practice, rather it should just be a condensed version of what you typically do. I love long warmups but time restrictions and space constraints tend to make that pretty impossible, especially when you’re at a large regatta (like nationals, for example).

One of the things I learned early on is just because you’re launching 45 minutes before your scheduled race time does not mean that you’ll have enough time to go through your typical routine. I remember thinking before one of my first races as a freshman that I totally had time to do what I’d been doing at practice before eventually realizing that because we did so many arms, arms and body, and half-slide strokes, in addition to having to stop a couple times for the races coming down and crews stopped in front of us, that we hadn’t actually moved the boat that far up the course.

This meant that in order to get to the starting line on time and not miss our race, we had to haul ass for about 1000m, which probably took a bit of the edge off the rowers (for the sake of proving my point, let’s pretend it did) in addition to causing them to use more energy than they should have since we needed to row at a higher rate and pressure to get up there.

Here’s a couple things to remember about your warmup on race day:

Be mindful of the weather

This will definitely have an effect on what you can and can’t do. If it’s cold, raining, snowing, etc. you’ll want to make sure you’re keeping as many people moving as possible without letting them sit out for too long to avoid anyone getting too cold or stiff. This might mean rowing by all eight instead of sixes or cycling through the sixes every 10 strokes instead of every 20 before going to all eight. If you’re experiencing a crosswind or a strong headwind, rowing by anything less than sixes isn’t going to get you anywhere and will only end up slowing you down.

If it’s really hot out (particularly with minimal cloud cover), try to row up in the part of the warmup lane that is the most shaded. This will keep them out of the sun and in a slightly cooler area until it’s time to race. If there’s not a lot of shade, make sure you’re giving each pair a couple strokes out so they can get a drink or at least take a break since the sun can/will quickly deplete their energy and dehydrate them. You also don’t want to sit for too long in the staging area for those same reasons.

Keep the stroke rates reasonable

Something that I noticed about our lightweight 8+ today as I was watching their warmup was that it looked rushed. Not in terms of slide control but just in general – they were flying through each part of their warmup and it didn’t look like they were actually warming up. Instead it looked like they were just taking strokes to take strokes and that was it. When I take out a boat I very rarely let the stroke rate creep over 20spm at the beginning of practice, let alone on race day. The point is to get your muscles warmed up and get the crew in the swing of things, not to exert 1/4 of your energy reserves right off the bat. Unless you’re doing starts, keep the stroke rate around 18-20spm, 22spm at the highest if you must. And no, the excuse of “my stroke just can’t get it down that low” doesn’t fly because if you wanna be able to row fast, you’ve gotta be able to row slow. Figure it out.

Be aware of how much space you have

The warmup lanes are typically not that big. You might get lucky on some courses but the majority of the ones I’ve been on have about a lane and a half to two lanes worth of water for you to row in to get to the starting line. This usually isn’t that big of a deal because there’s always room to pass someone if you’re coming up on them but where it messes with your plans a bit is when you’re trying to get some starts in. If you’ve got a fair amount of open water between you and the crew in front of you then go for it, otherwise hold off until you’ve got at least two lengths of open to work with. Never do a start when you’re right beside someone or have little to no open water between the two of you.

If there’s a crew coming up behind you, ask their coxswain if they’d mind moving to [whichever side you want them to move to] once they pass you because you want to practice a start. I’ve done this plenty of times and have found that as long as you’re nice and communicate with them, you won’t have a problem. Unless you’re on one of those courses where the warmup area is huge, don’t try to do more than a start and five. You shouldn’t do more than that anyways because again, that’s energy and power you want to save for the race.

Be efficient

Don’t take more hard strokes or total strokes than you have to. Take as many strokes as you need to complete your warmup before going to all eight at a steady pace to get you the rest of the way to the staging area.

Pay attention to the time and manage it properly

Know how long your race warmup usually takes (this means run through it at practice a few times…), add in 3-5 minutes to account for having to stop for other crews, races that are coming down, quick water breaks, etc. and then subtract that time from the number of minutes you’re launching ahead of your race. This will give you an idea of how much time you have to play around with so that if you find you’re running ahead of or behind schedule, you can tweak things as necessary.

So, if you know your warmup usually takes around 11 minutes, you factor in about 4 minutes of “stoppage” time, plus the 5ish minutes that you’ll need for staging (getting lined up, locked on to the stake boats 2 minutes before the start, etc.), that adds up to around 20 minutes. If you launch on first call, which is usually 35- 40 minutes before your scheduled race time, that’ll leave you with about 15 minutes. Once your warmup is done, you can row by all eight the rest of the way to the starting line (let’s assume that takes 5-7 minutes) and then hang out up there with the other crews for the final few minutes before they call you up to the line for staging.

Make sure you have a watch (or your phone) with you so you can keep an eye on the time – do not be that coxswain that is asking their rowers, the officials, other coxswains, etc. what time it is or gets their crew to the start late. You look unprofessional and ultimately it’s disrespectful to the competition and officials. I don’t care if you’re a novice or a college varsity coxswain – get a watch. On the flip side, don’t be that crew that feels the need to be first to the starting area. You don’t get a prize for that and it more than likely means your rowers will spend more time sitting stationary than they should be, which can lead to them getting cold, tense, etc.

I usually start with a simple drill, like the pick drill by 6s on the square, and rotate through before picking it up all eight at steady state-ish pressure at 18-20spm-ish. My coaches liked to have us do quarter feather for awhile when we were rowing all eight but I only did that about half the time. (I’m not a fan.) Another thing I’ll do if we don’t have the time or room to do starts is I’ll do some quick builders while we’re rowing by all eight. Usually I’ll do one ten (with 3 to build) at roughly our starting SPM and another at base pace with about 10-15 strokes in between. I’ll also try to throw in 15 strokes at our sprinting pace, going “up 2 in 2” every 5 strokes. I’ll usually only do this after stopping for a quick break and asking the rowers how they feel and if they want to do this one. If we didn’t get much time to practice our sprint during the week we’ll do it, otherwise most of the time we’ll just pick it up all eight at a steady pace the rest of the way to the starting area.

One thing you have to remember is that you’ve got – GOT – to be flexible. Sometimes you’re not gonna have time to do part of your warmup and other times you’re going to have tons of time and/or space. Not having a lot of time doesn’t mean that you should rush, rush, rush through everything though because that accomplishes nothing – all it does is communicate a sense of frantic-ness that you don’t want the crew to be experiencing.

It’s your responsibility to keep them (and yourself, obviously) calm, cool, and relaxed. If you find yourself short on time for whatever reason, calmly communicate that to them as you’re coming out of the launching area and say “Alright guys, we’re not gonna have time to go through our usual routine so let’s go ahead and pick it up by all eight at an 18 on the quarter feather. This’ll be our warmup so let’s make sure we’re taking smooth strokes together and getting long at both ends to warmup the muscles.” It’s much smarter to eliminate things than to fly through them just for the sake of being able to say you did them.

This is where paying attention to the time is very important too. If you find yourself far enough up the course with a bit of time on your side now, go ahead and drop down to sixes for 10-15ish strokes each to give each pair a chance to make any necessary adjustments, grab a quick drink, etc. If you find yourself to still be behind schedule a bit, have the crew add just a bit of pressure to their strokes. I wouldn’t recommend having them row any more than 3/4 pressure max because, again, that’s energy they should/could be using during the race. (If you have to row all eight, full pressure to the starting line somebody somewhere screwed up big time.)

If you find yourself out there with tons of time, lengthen out your strokes a bit or throw in an extra 30 second break. If you normally row at an 18, row at 16 or row by 6s a little longer than you otherwise would. The goal here is to make sure you don’t go through your warmup at a normal pace and then find yourself sitting up at the starting line for 20 minutes instead of your usual 5-10. Resting for too long is just as bad as not resting for long enough because as I mentioned before, the rowers can get cold, stiff, dehydrated, fatigued, etc. depending on the conditions. I’m always jittery going to the starting line so getting there earlier than I needed to would only end up exacerbating my nerves and making me imagine every possible way that I could fail at getting into the stake boats (or something equally as dumb since backing into stake boats is pretty freakin’ easy after the first time or two).

To summarize, have a race day warmup plan that is a condensed version of your usual day-to-day warmup, be flexible and able to tweak things at a moments notice if/when necessary, and pay attention to the elements and know how to adjust if the conditions don’t allow you to follow your usual plan. Also, have a watch or timepiece of some kind so you don’t have to rely on your rowers or anyone else on the water to tell you what time it is.

Image via // @deutschlandachter

Coxing Drills Q&A Rowing Technique

Question of the Day

By readyallrow May 17, 2014

What checks the boats run? Recently in our octo the run of the boat is checked but I don’t know how to prevent it and what to call to make it better. Thanks love this blog, so helpful! 🙂

For those that don’t know, an octuple is an eight rigged with sculling riggers so that each rower has two oars instead of one. They’re raced very infrequently in the US because they have the ability to move way too fast to be considered safe.

Check out the post linked above – it’s definitely the most “in depth” one I’ve written in regards to check, what it is, and what drills you can do that help the crew work towards eliminating it. It’s not something you can directly prevent – the best thing you can do is explain the concept of ratio, why it’s important, etc. since it seems like the lack of ratio is your biggest contributing issue right now. As far as calls go, simple/obvious ones like control, relaxed, long, etc. that really focus on and emphasize slide control on the recovery would be good to incorporate while you’re working to figure out what the underlying technique issues are.

I’d also have your coach watch from the launch to see if he/she can pinpoint any individual issues that are contributing to the boat feeling checked, as well as who specifically is rushing the slides or whatever so that you can direct some of your calls directly towards them. Talk with your coach after practice and have them go over in a bit more depth what they saw so that you can understand what you should be on the lookout for (individually and with the whole crew), in addition to having them go over some drills that you can do with the rowers either on the warmup or when you’re just sitting by yourselves that can help the rowers (either as individuals, pairs, etc.) work towards gaining a little more control on the recovery.

We had this issue earlier this season with one of my boats so we did some double-pause drills one day during practice, which seemed to help a lot. (I talked about this a bit in the post linked above in the “rush on the last 1/3 of the slide” section.) I would try incorporating that drill into your warmup (when rowing by 4s or 6s) and really emphasize slow slides coming into the catch on the last part of the recovery. Another thing is making sure the rowers have got their full body prep by the time they reach bodies over (there’s a reason why that stage of the stroke is called bodies. over.) since not having the bodies prepped can lead to them throwing their chests forward on the last inch or two of the slide to get all the length that they should have had half a stroke sooner. The “throwing forward” of the body weight also contributes a lot to the boat feeling rushed and checked, especially if you’ve got more than one person doing it.

Everyone rows hard on the day of a regatta. The winners rowed hard for months before.

Coxing Racing Rowing

Race skills: All about Power 10s

By readyallrow May 8, 2014

As I’ve been talking to coxswains and listening to recordings I’ve been thinking that it’d be worthwhile to explain power tens in a bit more depth so you have a better idea of what they are, what they aren’t, what their purpose is, etc. Having this understanding will, hopefully, make them a more efficient part of your race plan/strategy as we head towards the peak of racing season.

What power 10s are

Power 10s are strategic bursts that you take during a race. 99.8% of the time they should be called for something if you want to achieve maximum effectiveness. Giving each one a purpose gives the rowers something to latch on to, for lack of a better term, whereas just calling a plain “power 10” isn’t likely to make them do anything different than they were before.

Power 10s are also one of (if not the) biggest misnomers in the sport of rowing. We call things “power 10s” even when they’re not strictly about power because there aren’t really any other words for them. I’ll also call them “bursts” if I’m taking a 5 or something short and sweet like that. I’ve actually been trying to get away from calling them “power” 10s and instead just say “gimme 10 for…”, “let’s take 5 for…”, “get ready for our 20 at 750m…”, etc. The reasoning for that is because when I take a 5 or 10 for leg drive (i.e. power) I don’t want the word “power” to be diluted because I use it for every other move/burst I take even when they have nothing to do with power.

What power 10s aren’t

Power 10s are not something you should just randomly call during a race because you think that’s what you’re supposed to do because you’ve heard other people do it. You’re less likely to get a response from your crew in terms of power, effort, etc. if you just yell “power 10” and start counting.

Does a power 10 have to be 10 strokes?

No. Obviously if you say “power 10” then you should call 10 strokes but you can do other variations too, like 5, 15, or 20. If you call anything more than ten strokes, make sure you’re separating them into chunks of ten rather than counting the whole thing sequentially – i.e. a 20 would be two sets of 10, counted out “…8, 9, 10, 1, 2, 3…” rather than “…8, 9, 10, 11, 12, 13…”.

Similarly, a 15 (also known as a “5 and 10”) would be counted out as five strokes followed by ten strokes. Usually if I call something like this I’ll actually count the five strokes down as a way to build into the ten strokes, which I’ll count up like normal – i.e. “…3, 2, 1, 1, 2, 3…”.

Do all of those have the same purpose/mean the same thing?

No. This is how I usually (not always but ~90% of the time) treat each burst:

5-stroke burst

I tend to call a 5-stroke burst for things related to technique (i.e. sharpening up the catches, holding the blades in through the finish, smooth/even power on the drive, body swing/length at both ends), posture (i.e. supporting the bodies, staying tall, relaxed upper body, eliminating the tension), internal focus (i.e. rowing our race, establishing/re-establishing the rhythm, individual responsibilities), or other miscellaneous things like breathing, commitment, legs, etc.

10-stroke burst

I call 10s when I want to take seats (no more than two, maybe three) or walk on another crew.

15-stroke burst

15s are the overlooked middle child of power bursts. I don’t call them very often but when I do it’s because I’m trying to kill two birds with one stone. Like I mentioned before, I almost always count the five strokes first (5, 4, 3, 2, 1) followed by the ten (1, 2, 3…) because I like the “prep/build” period that those five strokes give you.

The only time where I would do the opposite is coming into the sprint where you would typically build for a few strokes coming into it anyways. In that case I’d count the ten first followed by the five, which would act as the “five to build” where you’d be bringing the rate up.

20-stroke burst

20s are strictly for making big moves on another crew or walking on/through the field. These should be used sparingly during a sprint race (once is sufficient, twice is enough, three is too many) but you can usually get away with maybe three or so during your average-length head race.

How do you count out each one?

This is mostly a personal preference thing with some input from the rowers on what they like best. This is what I was taught and also what makes the most sense to me so it’s what I do and teach. During a normal 10 or 20 during a race, I count up (1, 2, 3…). If I’m building into the sprint or prepping them for a big move/shift, I count down (5, 4, 3…). If I’m counting down the last [however many strokes] to the finish line I count down (10, 9, 8…). If I’m calling something “in two” I count up (1, 2…). Occasionally I’ll say “in two … in one…” but normally if I’m not just saying “on this one” I count up.

How do you call each one?

Again, this is mostly a personal preference thing but this is how I try to call them in race situations. During practice you can be a bit more lax if you want unless you’re doing a piece or something simulating your race, in which case you’d want to call them like you do during a race. This helps familiarize the crew with how you do things so there are no surprises on race day.

5-stroke burst

“Aaron, blade in right at the front end, direct to the water. Let’s take 5 to sharpen ’em up together, ready, now. Sharp, send … sharp, send … sharp, yea Aaron … together … sharp, yea there we go! Grab the water and send…”

10-stroke burst

“Alright, two seats down on UVA, I got Adrienne on their 3-seat. Let’s take ten to get even, get it on the legs and through the water … on this one. Power through, power through YEA TIGERS, 3 walking, 4 1 seat down, 5 here we go, jump send, jump half a seat, 8 reel ’em in, 9 big legs, 10 EVEN! Sitting coxswain-to-coxswain, stay solid with the legs and move now…”

15-stroke burst

“Coming up to the bridge, 400m to go, let’s sit up, take a deep breath, and get ready to take 15 into our sprint – first 10 for commitment on the legs, last 5 to build the rate up – ready to go in 3, in 2, in one, COMMITTTTTT … 1 together, 2 drive it down, 3 send it out, 4 send it out, legs keep the length, legs BOWBALL, legs push ’em back, 8 ready to build 9 we move together, 10 here we go, NOW on the legs, together 34.5, together 35, punish them 36, last 250 breathe … go now!”

20-stroke burst

“Sitting in second, 8 seats up on Cal, 3 seats down on Stanford coming into the third 500. Let’s get our minds ready for the 1000, shift that focus internal and get ready to move. We’re taking seats – no mercy. Ready to go in 3 … in 2 … in 1, get on it and ATTACK! Gimme that bow ball, 2 yea Tigers, 3 chaaa, 4 chaaa, jump send ’em back, jump send ’em back, 7 BOWBALLLLL, 8 finish them, ready to move we’re one seat down, up 2 to get even, HERE WE GO NOW, send it out, 2 walking, 3 YEA, 4 half a seat, get it yea, EVEN yea, stay on it send, leeegs send it, 9 half a seat up, 10 YEA TIGERS! One seat of open on Cal, got the stroke of Stanford. Sharp with the catches, our bow ball stays in front. Stride it out to base … on this one, length and power, length and power…”

Where and how often should you call for a burst?

Read the post linked at the beginning on where to call them (there’s a bit of strategy definition in there too) and the post linked below for some thoughts on frequency. If you twisted my arm and made me give you a number of how many bursts you should take over the course of 2000m, my gut reaction would be to say a max eight. That includes one 20 (your “big” move), two or three 10s, a couple of focus 5s, and whatever build you do into your sprint (if you do one).

For 1500m, I’d say six total (one 20, a couple 10s, and maybe one or two 5s) would be sufficient. You don’t want to burn your crew out by calling ten after ten after ten and you most especially do NOT want to that coxswain that counts every single stroke of the entire race.

The bottom line is to call and use these bursts responsibly. Rowers, don’t be afraid to talk to your coxswain too if you have concerns over their use of them since feedback on stuff like this is much appreciated.

Image via // @ryanjnicholsonphoto

Q&A Rowing

Question of the Day

By readyallrow May 2, 2014

So due to a bunch of injuries a girl from the boat below us got moved up to our boat for the time being. Well another girl in the boat above us is now injured, and so they need to pull someone from our boat for the next race, and our coach said it will be our other port, the girl from the boat below us who is only with us for the time being. I swear I literally harbor 0 bad feelings or jealously for her, I just have to wonder from a coaching standpoint why they would make this choice. Thanks!

We’ve had some similar issues lately too. Just going off of that I’d say your coach is looking at this one of two ways: either the girl he moved up is one of those rowers who fits in/meshes well with whatever boat she’s put in (versatility and flexibility are golden qualities for a rower to have from a coaching standpoint) or she’s literally his only option for one reason or another (it’s hard to guess the reasons because it can vary so much). In most cases though where I’ve seen a coach make a lineup switch like this it’s because of the first reason I listed.

Pro tip though, in late April/early May, don’t get injured and/or sick. Take care of yourselves! I know coaches might act like all they care about is their lineups (that’s probably how it’s come off to our team lately) or like they’re pissed at you because of something that’s (nine times out of ten) completely out of your control, but I promise neither of those are true. The vast majority of coaches out there really care about you guys and look at you as way more than just a body in a seat.

From my perspective with having to deal with these same issues over the last couple of weeks, it’s way more frustrating on an administrative level than anything else. When we hear that someone is sick, injured, etc. we’re automatically thinking about if it’s even possible to make a lineup switch/change, how we’re going to re-configure those lineups to give each crew the best possible shot at winning, what the limitations are on how many events people can row in, how close one event is to another, etc. and if that’s going to affect anything, and on top of all of that, the paperwork (with updated lineups) that has to be re-submitted to the regattas we’re going to that weekend. If it comes off like your coach is mad at you, think back to this post and know that their irritation is more than likely related to the things I just listed and not towards you.

Coxing Rowing Video of the Week

Video of the Week: “Ignatius, stop rowing”, pt. 2

By readyallrow April 28, 2014

College Coxing Q&A Rowing

Question of the Day

By readyallrow April 19, 2014

Hi!! I’m a high school junior, and recently I’ve been looking at colleges. At my high school, I’m a mid-pack rower, but the colleges I’m applying to are for academic reasons, and most of them are D1 and way too competitive for me as a rower. I’m 5 foot 8 and 123 lbs, and I’m considering becoming a men’s cox. Do you think that it’s a good idea? I’m already familiar with rowing, but due to my size and lack of experience, would it be a better idea to try as a rower? I really love the sport and want to participate during college, so whatever you think is best!

Hi! I’m assuming by too competitive you mean that your times wouldn’t stand up against the other rowers, not that the sport itself is too competitive in terms of the commitments, etc? If it’s the former then I’d say look for local clubs around the university and see if you can start training there. If you want to keep racing you could pick up sculling and go to regattas like Club Nationals, Canadian Henley, Independence Day Regatta, etc. over the summer. That way there’s no conflicts with school and you would set your own training schedule. I personally don’t know that much about sculling but from everything that I’ve heard from friends and other coaches, it helps your sweep rowing a ton.

As far as becoming a coxswain for a men’s team, it’s worth looking into if you’re really interested in it. You’re a little taller than most coxswains but in the grand scheme of things it’s weight that matters, not height. Plus, the men’s minimum is 120lbs so you’re good with that given your current weight. You can walk on to the team with no coxing experience – plenty of people do it – so it’s really your choice, just don’t expect to get recruited as a coxswain since you don’t have any experience with it.

I think based on what you said about looking at colleges for academic reasons (priorities, man – good for you!) finding a local club that you can row out of on your own schedule would be your best bet. I think most clubs have lower fees for college students, although I’m not sure if that applies year round or just in the summer. Another thing worth looking into though!

Q&A Rowing

Question of the Day

By readyallrow April 10, 2014

I’m starting to fall out of love with rowing and it scares me because I don’t know whether it’s because the sport is so stressful or it’s just because I’m not progressing, which is stupid, but I don’t know what to do because its been a huge investment for my family.

Are you not making any noticeable improvements because you’ve hit a plateau or because you’ve stopped trying? Be honest. If you’ve been doing the same types of training for awhile it might just be an issue of switching things up so that your muscles become un-bored. That’s what happens when you plateau – your muscles adapt to the training you’re doing to the point where they’re so used to your routine that they get bored and stop responding. If it’s because you’ve given up for whatever reason then you’ve got to make the decision for yourself whether or not you want to readjust your outlook and keep trying or if it’s no longer worth it to you and it’s time to move on. You should also consider whether or not you’re burned out. If you’ve been doing crew non-stop for a year or more then you’re probably just tired, mentally and physically, and that’s contributing to why you’re not progressing the way you want to be and why you feel like you’re just kinda over it. The solution to this is taking some time off, even that means just a couple days to start with. If you can, try to take the whole summer off from rowing and then once August rolls around, reevaluate how you’re feeling and go from there.

The investment that your family has made should be something you keep in mind because obviously that’s an important factor to consider but don’t base your decision off of that. You shouldn’t continue to do something just because you feel guilty over the amount of money, time, etc. that other people have put into it. If you’re genuinely not enjoying yourself anymore then that’s reason enough to take some time off. It’s OK to stop enjoying something you once loved doing but you’ve gotta be honest with yourself about it and recognize when you’ve reached that point. Talk to you coach and/or parents, tell them how you’re feeling, and get some feedback from them. See if you can negotiate a break with your coach so you can clear your head and reassess the situation. Sometimes looking at it from the other side when you’re not overwhelmed by a million different things can help you come to a decision.

Q&A Rowing Technique

Question of the Day

By readyallrow April 6, 2014

Hey Kayleigh, I was hoping you could lend some advice on spacers, the correct positioning of your body in relation to the pin, and how to change these things either before you are out on the water or while you are out on the water. I was told that when in doubt to take a spacer off… is that the rule of thumb? It is different due to the type/make of the boat? Any help would be much appreciated. Thanks!

Changing the positioning of the spacers effects the height of the oarlock, which will then correspond to how easy or hard it is for you to get your blade out of the water. To adjust the spacers, all you’ve gotta do is pull them off (which takes some muscle) and reposition them either below the oarlock to add height or above the oarlock to lower the height. This is how it’s done across the board, regardless of the type or make of the boat. I’d recommend doing it on land, if you can, when the oarlock itself is dry. It’s much easier trying to get them off when the boat’s not tipping to the side and your fingers aren’t wet and slippery. Doing it on the water pretty much guarantees you’ll lose one if you do manage to get it off and unless your coach or coxswain has spares out with them, you’ll be stuck rowing with the oarlock lower than you want it. I’ve never heard the rule of thumb about removing spacers and couldn’t find much when I Googled it so that might just be what your coach has found worked best in his/her experience.

Where your body is in relation to the pin (aka your catch angle) relates to the positioning of your foot stretchers, your flexibility, and your skill level. Whenever you hear someone talking about rowing through the pin or rowing through the “work”, what they’re referring to is where your hips and seat are in relation to the pin when you’re at full compression. You want to make sure you’ve achieved your full body angle ahead of the pin so that when you reach full compression, the relation of your seat to the pin is accurate. When you’re sculling I think you’re supposed to be even with the pins but with the larger sweep boats you’ll typically go a couple centimeters past that (a couple being 1 or 2cm). If you’re (excessively) in front of the pin then you’re going to have a very steep catch angle, which is going to cause you to have mostly ineffective stroke due to the excessive load you have to contend with. It also puts a lot of unnecessary stress on your low back. If you don’t reach full compression then you’re going to be behind the pin and have a very shallow catch angle, which is also ineffective since you’re not loading the blade enough.

Regarding your foot stretchers, if they’re too far up (closer to the stern) then you’re likely to be too far in front of the pin and if they’re too far back (closer to the bow) then you’ll be too far behind it. If that’s the issue then you can easily fix that on the water by removing your feet, loosening (but not removing) the wing nuts, and moving the stretchers forwards or backwards. You can do it on land too if you’ve got the boat upright in slings. I wouldn’t recommend trying to do it with the boat on the racks because there’s always that risk that you’ll loosen everything too much and the stretchers will fall on your face.