Q&A Rowing

Question of the Day

Hey, as a coach you might be able to tell me, in a quad how do you decide who goes where? And the same for an eight? Where you’re placed in the boat, should this tell you anything about where you “sit” compared to the rest of the crew?

I assume where people go is decided the same way it is for an eight or any other boat. I’ve seen coaches get super methodical about it and put lineups together based on tried and true methods and I’ve seen others put them together based on … nothing. Not every coach follows what I’ve written here but it’s what I’ve seen the coaches I’ve been with do so it’s what I know to be the most effective method of putting together a crew.

Regardless of the boat class these tend to hold true for each seat across the board.

The most basic determination of a lineup is based on weight. Lighter rowers are in stern and bow pair and the heavier rowers are in the middle four. This has a lot to do with boat physics. When selecting sides, some coaches will ask the rowers which is their dominant hand to help them determine whether they should row port or starboard. If you think about it, it makes sense. Feathering requires a lot of muscle control and that motion is made easier if the dominant hand, which has a more developed sense of fine motor control, is the inside hand.

With the exception of the coxswain’s seat, bow pair is where your smallest rowers (height and weight wise) will be. The hull is at it’s narrowest back there, so having a smaller rower there ensures that they won’t be impeded by the sides of the boat while trying to row. The main job of bow pair is to stabilize the boat, ignoring the fact that they sit in a very unstable part of the shell. Because of this, their technique needs to be pretty good. Movements and adjustments are felt more strongly back there and tend to have a greater effect on the boat compared to similar adjustments made by rowers in other seats. Thus, these rowers need to be precise. Even though no one is following bow pair, the ability to mirror the movements of the stern pair is critical. The farther towards bow you get, the worse the rushing becomes, so it’s important that they be able to zone in on stern pair’s blades and follow them closely. In boats without a coxswain, the bowman takes on an additional responsibility of being the pseudo-coxswain. They steer the boat with their toes (hence the phrase “toeing the quad”), so their sense of precision has to be heightened. They’re also in charge of making calls for shifts in stroke rate, power, etc. so it’s imperative that they have a good understanding of how the boat moves and be able to assess the situation like a coxswain would.

Seats 3, 4, 5, and 6 are known as the “engine room”. Their only job is to produce power. They sit in the widest, most stable part of the boat, so any movements or adjustments they make have little effect on the rest of the boat. (Don’t read that and think “oh, well, I don’t have to make adjustments then if no one else is going to notice”. WRONG-O!!) These rowers are typically the tallest and heaviest, meaning they naturally have the ability to produce more power. Since that is their focus, they aren’t always the most technically sound members of the crew. If you read that and assume you can get away with shitty technique, you’re 0-2…technique is still extremely critical to making a boat fast. These rowers simply have a slightly different role in the boat than everyone else. Lineups are usually built around seats 5 and 6, where the strongest of all eight rowers are usually placed. Like the stroke, they need to be consistent, although instead of with stroke rate it’s with their power production.

Stern pair is where you want your most consistent (and ideally, technically sound) rowers. They must also be some of the most physically fit members of the crew. Their job is to set and maintain the pace of the boat – they think for the rest of the crew in a way the coxswain can’t. The stroke must have good communication skills in order to be able to relay feedback to the coxswain so they can make the necessary calls. 7-seat acts as a buffer between the stroke and the rest of the crew. Their role in stern pair is to maintain the stroke rate and rhythm set by the stroke and to “pass it back” to the rest of the boat. While the technique of these rowers is usually very good, particularly the stroke’s, it can be affected by focusing too much on the rest of the boat. As stroke, you’re not focused on just one thing like the engine room or bow pair is. This is most often why coaches will put the stroke in 6-seat for a practice or two. If this happens, don’t freak out. It’s not a demotion or indication that you’re not up to par. It’s a good thing because it gives you a chance to row without worrying about the seven other people who are looking to you to set the rhythm. It gives you the opportunity to focus on and clean up your technique before moving back up.

In smaller boats, the responsibilities of each person in a given seat is still the same with the exception of the middle pair in 4s. They have to take on the characteristics of not only the engine room but also those of bow pair and stern pair.

Leave a Comment

Comments (7)