Category: Coxing

Coxing Drills Novice Q&A Rowing Technique

Question of the Day

Hi! So I am in my fourth season of crew, and my second season of coxing. Our season started Monday and the novices were already on the water. I was not with either of the novice boats that day but I coxed one today. I found it really difficult to teach them everything. Do you have any advice on how to teach the novices? Also, our first race is in 4 or 5 weeks, so the novices need to get the hang of it as soon as possible so that we can get “normal” boats put together. My boat today was able to row all 8 (6 novices and a 2nd season rower and stroke) fairly well. Any and all advice would be super helpful. Thanks so much!!! I love your blog- I’ve used it since I started rowing.

Therein lies the problem – you can’t teach them everything all at once. Imagine you’re sitting in math class and your teacher starts the day by teaching you to add two numbers together and finishes 90 minutes later by trying to get you to do differential equations … that’s what most coxswains (and new coaches – I was definitely guilty of this) try to do when they’re in charge of a novice crew. You have to start really simple and build from there once you’ve established a solid foundation. 4-5 weeks is plenty of time to get them rowing well enough to race so don’t rush through everything or try to pile on too much in a short period of time just because it feels like you don’t have that much time to work with.

I run our walk-on program in the fall and what we always start off doing (both on the ergs and in the boats) is a super basic pick drill. We’ll start off doing arms only for awhile (like, 15-20min) and I’ll walk around the ergs adjusting peoples’ form and making sure they’re getting the motion down. It’s obviously not going to look great but if it’s like, 75% there I’m happy. From there we’ll take a break and then do arms + bodies. Same routine, I’ll walk around and coach people as necessary but for the most part I want them to just focus on getting the motions down. Even though there are like, a thousand things I could say to them I try to err on the side of letting them figure it out for themselves (unless it’s so egregious that I have to say something) since I think that’s goes a lot further than if I were constantly in their ear nitpicking everything they’re doing.

Once they’ve got arms + bodies down we’ll go back to arms only and blend the two together, so 10 strokes doing that and 10 strokes adding in the bodies, and then we’ll repeat that once or twice more. The next day we’ll start with what we finished with the day before, cycling through arms and arms + bodies before adding in the slides. We’ll start with determining where half-slide actually is, what it should look like, feel like, etc. and then I’ll have them row at half-slide for a bit, similar to what we did the day before with arms and arms + bodies. Most of the coaching I do here is just reminding them to get the hands away and bodies over before the slides start and to not go too far past where half-slide should be.

Another point of focus is feeling what it’s like to drive off the footboards with the legs at the catch, although I don’t bring this up until I feel like they have a comfortable grasp on the recovery sequence. After they’ve got half-slide down we’ll lengthen it out to full slide and repeat the whole process again. Points of emphasis here are, again, hands away/bodies over before the slides start and not flying up the slide just because your butt is on wheels.

Assuming our first practice is on a Monday, we’ll do all of that on Monday, Tuesday, and Wednesday (with Wednesday just being a “review” type day of everything up to that point … nothing new gets added) and then on Thursday/Friday we’ll start off with the pick drill (15-20 strokes each) before going into 3-5 minutes of continuous rowing (ideally in the tanks if they’re available). After that we’ll take a break and then do some kind of drill – like cut-the-cake or a pause drill or something relatively simple like that – before going back to a few minutes of continuous rowing.

Once we get on the water (and after spending the first day doing “admin”-type stuff – i.e. how to set the boat when you’re rowing and not rowing, what stern four, bow six, etc. means, how to spin, and all the other basic stuff) we’ll repeat what we did on the erg, either by pairs or fours depending on if we’re in a four or an eight and what the weather is like. The more stable you can make the boat, the less frustrating practice will be for them and you so always lean towards having less people rowing when it’s safe to do so. Oh, and don’t even think about rowing on the feather for at least a few days (or longer…). Stay on the square while going through the stroke sequence, rowing by 6s, etc. and get them comfortable with figuring out blade heights, setting the boat, etc. before you teach them the feather. Keep in mind that square blade rowing is a pretty useful drill in itself.

Related: Hi, I was wondering about coxing brand new novices. I’m in boats right now where most, if not all, people are still learning how to row and working on figuring out technique so I haven’t been making very many calls other than if the balance is terrible or if people aren’t rowing together because my coach is talking individually to people to work on body form and things I can’t see. I feel bad about not saying very much, but I don’t want to interrupt the coach or focus on things not important right now. Other than steering straight and paying attention to explanations for correcting form, what should I be doing to improve my coxing?

What my coaches always did (with us as novices and as an experienced crew) and what I try to do with the walk-ons is once we were able to row by all eight (and not have it be a total shitshow), we’d row 20ish strokes by sixes and then all eight for 10 on the feather, rotating through the sixes for … probably 30ish minutes or so. A couple practices later we’d do the same thing except reverse it – 20ish strokes by all eight on the feather and 10 by sixes on the square – before eventually making our way to all eight on the feather (at which point we’d eventually work in varying rates and pressures to keep things from getting too boring).

All in all, everything I just said could be covered in roughly three to four weeks, depending on how quickly you moved through it all, which gives you a week or two to introduce them to racing and how all that works.

Related: Managing novice coxswains

All that aside, the best advice I can give you is to talk with your coach and figure out what their plan is for coaching the novices. If they want you to be in charge of coaching them while you’re coxing (which isn’t uncommon) then at least discuss with them what you should cover each day so you’re not trying to come up with stuff on the fly. If you’re going out with your coach then let them do the bulk of the talking/coaching while you act as the reinforcer of what they’re saying as necessary. Make sure that whatever you are saying is communicated as clearly and in the most simple manner as possible too. If it can be broken down into simpler concepts, do it. You’ll end up saving a lot of time in the long run when you don’t have to go back and re-explain something that you didn’t cover initially because you thought it was obvious or assumed. (I touch on that in the post linked above – it’s about coxswains but the ideas behind the first three bullet points could all easily apply in this situation too.)

Top 20 Terms Coxswains Should Know: Ratio

Coxing Rowing Technique

Top 20 Terms Coxswains Should Know: Ratio

Previously: Rush(ing) || Body angle || Pick drill || Suspension || Skying the blade || Quarter feather || Pin || Run || Lunge || Washing Out || Missing water || Footboard || Check

What part of the stroke/stroke cycle does it refer to

The recovery and the drive, but it’s primarily referenced while on the recovery.

What does it mean/refer to

Ratio is the contrast between the drive and recovery. The standard ratio for rowing is 2:1, which means that the length of time spent on the recovery should be twice as long as the amount of time spent on the drive. To understand why this is necessary, read the first paragraph of #2 in last week’s post on check (linked below). Pretty much everything that’s discussed in the “check” post and the “rush(ing)” post, as well as any of the other posts linked in there, will be relevant to this one.

Related: Top 20 terms coxswains should know: Check and Rush(ing)

As you start rowing at higher rates the ratio is going to get closer to 1:1 (the boat has more momentum so the recovery doesn’t need to be as long) but you can still maintain the same sense of rhythm that you have at lower rates by focusing on letting the boat run under you. Another way of looking at it is letting your feet come to you rather than you moving towards your feet. This ensures a consistent recovery speed by minimizing the chances of you throwing your weight forward or rushing the slides.

Relevant calls

Several of the calls I make for ratio are detailed in the two posts linked below. Another call I recently picked up was “execute some patience”, which refers to keeping the recoveries controlled and consistent.

Related: Top 20 Terms: Run, specifically the “relevant calls” section

You want to avoid generic calls like “slow the slides” or “let me see that ratio” (I hate that call) because they’re not effective and don’t give the rowers anything to go off of. Saying “slow the slides” is just asking for all eight people to slow them down at different times/speeds so if you’re going to make a call like that (which you really shouldn’t unless you’re with a more experienced crew that can infer what you mean from that … and even then, use it sparingly), be specific about what you want and use a call for the drive to emphasize the contrast between it and the recovery.

Related: Calls to control rush? There’s only so many ways to say “control the recovery” and “slow the slides.” Thanks!!

Another thing I do here is to make a call about getting the hands away together and at the same natural speed (which should be at whatever speed the boat is moving) – usually I’ll say something like “let’s re-establish the ratio, hands away here … hands away here” where “hands away” is said midway(ish) through the drive and “here” is said (aggressively and succinctly) right as they tap down. Tone and inflection are important here but in my experience it really helps to establish a good rhythm through the back end which you can then carry over into the ratio by following it up with calls to stay long, composed, feel the run, stay steady on the slides, etc.

What to look for

When the ratio is off at lower rates you’ll feel (and occasionally see) the boat move backwards a little when the rowers are on the recovery. It’ll also usually feel like you’re rowing at a much higher rate than you are. At higher rates it’ll feel like you’re spinning your wheels and like the rowers are just moving back and forth on the slides without any real purpose.

Effect(s) on the boat

Moving faster on the recovery than you are on the drive will cause check in the boat, which decreases your speed minimizes how much run you’ll get per stroke.

Related posts/questions

The Four Defaults

I say “catch 1,2” a lot to keep ratio but after the catch when they’re on the recovery, why do I want them sliding back slowly? Shouldn’t that be the quick part when they’re actually taking the stroke? Or maybe my coach likes me to say that just because she still wants us taking it slow?

How do you call a ratio shift to control and stop the rush without lowering the SR? Is it even possible?

Coxed a varsity boat today for the first time. I felt awkward, I didn’t know what to say to them other than to make the calls. Normally, with my novices I know what techniques to tell them to change/fix but it’s awky with var. Also, what’s a ratio shift? My stroke today told me to call it, so I did. It’s just another way of saying “down on the recovery,” correct?  Do you have any tips? Thanks!

To see all the posts in this series, check out the “top 20 terms” tag.

Image via // @merijnsoeters
Coxswain Skills: How to handle a negative coxswain evaluation

College Coxing High School How To Teammates & Coaches

Coxswain Skills: How to handle a negative coxswain evaluation

Previously: Steering, pt. 1 || Steering, pt. 2  || Boat feel 

This might seem like an unconventional topic to put under the “things you should know how to do” umbrella but after spending many hours on coxswain evals over the last year and a half and occasionally feeling like pulling teeth would have been a more enjoyable experience, I think learning how to handle negative feedback/constructive criticism is an important skill that coxswains need to pick up sooner rather than later.

Feedback, both positive and negative, is essential to your growth as a coxswain. When communicated properly, it should touch on three main things – what you’re doing well, what you need to improve on, and areas where you’ve made improvements since your last evaluation. This is a big reason why I revamped how the info on our evals is communicated to the coxswains. Before the coaches just handed them the 20+ pieces of paper and left them to their own devices but now it’s all laid out in a single spreadsheet that hits the three points I mentioned before.

Related: Coxswain evaluations + my system for organizing them

Where going over evals becomes a contentious and unproductive process is when you take the negative feedback personally. Being told you aren’t doing something well can sting because of the amount of time we put into coxing but if someone is critiquing your coxing, they’re not critiquing you. You have to be able to separate you the person from you the coxswain and look at these situations objectively. On the flip side though, if you’re not putting in the necessary extra effort outside of practice (or hell, even at practice…) or you show up every day with a shitty attitude then you really have no right to complain about whatever’s being said, which I think more coxswains than not need to understand.

With that in mind, here are eight things (some of which may or may not be inspired by our coxswains ?) that you shoudn’t do when going over your evals.

Don’t get defensive

In most cases it’s the natural reaction to have but it can also come off as pretty immature. There’s a difference between defending your actions or making a case for why you did something a certain way and straight up making an excuse. You can defend something you’ve done one time (i.e. going through the wrong arch because you were unsure of which one to use due to construction on the bridge – a common problem on the Charles where this is always changing) but if you’re trying to defend something you’ve done multiple times (i.e. hitting the dock when coming in at the end of practice) then you’re just making excuses for why you haven’t adapted your steering to account for whatever was causing you to run into the dock in the first place (i.e. your speed, angle, line, etc.).

Don’t have an attitude or be sarcastic

Full disclosure, I started putting this post together after a particularly … uh, heated … meeting with one of our coxswains this past fall where this was the biggest issue I faced in trying to communicate with them the feedback that was on the evals. The bottom line is that you can be annoyed all you want but don’t be an asshole to the person taking time out of their schedule to go over this stuff with you because I promise, it just makes them not want to do it in the future … and if you have someone willing to go out of their way to discuss all of it with you, you are foolish if you don’t take advantage of it.

Don’t apologize 47 times for whatever mistake(s) you’ve made

Mainly looking at you, high school girls. Say it once sincerely and move on. Don’t make your coaches coddle you and have to keep saying “it’s fine” – I’ve had to do this recently and eventually it gets to the point where I’m like “I literally do not care if you’re sorry or how sorry you are, just do something different“. The more times you say sorry (especially for really trivial things that don’t require an apology) without actively changing your actions or behavior, the less your apology is going to mean when you really do screw up.

Don’t react immediately

If your immediate reaction to the feedback you’re getting is to blurt out “that’s not fair”, “I completely disagree”, etc. you will look so immature, even if the comments are unfair (which they rarely are) and you do disagree (which is fine but see point #1). Absorb the comments and think about what’s being said so you can try to understand why someone made that comment and then say that you’d like to come back to it later, either at the end of practice, tomorrow, etc., after you’ve had time to think about and process it.

And coaches, if your coxswain goes this route … respect it and say “OK, let’s touch base later”, even if that means spending an extra 20 minutes at the boathouse. If you force the issue by saying”no, we’re gonna do this now” you’re just gonna make them resent the whole evaluation process and their confidence/abilities will suffer as a result.

Don’t dwell on it, let it affect future practices, or use it as a reason/excuse for why you have a bad practice the following day

If you were caught off guard by the comments then that’s fine and you should take some time to deal with that but you also need to commit to letting them go, particularly when it’s time to get on the water. No pity parties or “woe is me” attitudes because the rowers don’t give a shit and the coaches are just gonna get annoyed because we have other stuff to focus on.

Don’t ignore comments you disagree with

Not all feedback is useful but disagreeing with a comment doesn’t mean you can straight up ignore it, particularly when getting any kind of feedback is so tough in the first place.

Don’t waste the opportunity to discuss, strategize, etc.

It’s like at the end of a job interview when they ask if you have any questions. You should always ask questions. I’m currently in the process of going over our winter evals with the coxswains and I told them ahead of time to bring questions, comments, things they wanted/needed clarification on, an action plan for the rest of winter training, a list of goals based on the feedback that was given, etc. because this is the prime chance to discuss all of that stuff with me. I see and talk to them every single day but direct one-on-one time like this is rare, as I assume it is with most of you and your coaches, so don’t waste the opportunity to pick their brains when it’s offered.

Don’t be resentful

If your coach(es) or the rowers have been telling you something for awhile and then it comes up again in the evals, you can expect that they’re all thinking “well … we told you so”. This shouldn’t piss you off or give you cause to be bitter towards them, it should instead act as a wake up call (or a “come to Jesus” moment, as our head coach calls it) that you need to do some serious self-analysis and get your shit together. They are telling you this stuff for. a. reason. Don’t ignore them just because you don’t think it’s important because it will bit you in the ass later.

Obviously these critiques are about what’s being said but ultimately their effectiveness is measured by how you handle and respond to them. This will also dictate how future evals go – the more receptive you are to feedback and the more diligently you go about addressing whatever issues are brought up, the more likely the rowers will be to continue giving you feedback because they can see that you’re taking it seriously. If you come off as aloof or combative in response to what’s being said, you’re not going to get better because the rowers will stop giving you any sort of feedback because it looks like you’re not taking it seriously. It’s your call.

Image via // @merijnsoeters
Coxswain Recordings, pt. 34

College Coxing Racing Recordings Rowing

Coxswain Recordings, pt. 34

As most of you know I got to coach at the coxswain camp that Sparks hosted in Tampa the week after Christmas. One of the other coaches was Katelin Snyder, current coxswain of the USA women’s eight, and she graciously offered to send me a bunch of her recordings to put on the blog. I’ve been obsessing over these things for the last week so I’m really excited to finally share some of them with you guys. The three I’m posting today are all in a playlist on my YouTube channel that I’ll keep updated as I share more of her audio in future posts.

University of Washington Opening Day 2008 vs. Navy and Poland

This is from Katelin’s junior year at UW, her second year in a row coxing the varsity eight.

Right off the bat you can hear how she calls the start isn’t like how a lot of coxswains call it. There’s some punch behind her words but for the most part she’s very calm and relaxed. One of the big concepts that we’ve talked about with coxswains at the Sparks camps is not losing your shit at the start of the race and instead remaining composed and keeping your focus on steering straight through the first five or so strokes. This is a perfect example of what that should sound like.

At 0:45, I really like how she called their stride – “we’re striding in three strokes, increasing boat speed in two…”. She says what she wants (stride) followed up with an objective (increasing boat speed), and says it all as succinctly as possible.

When calling something like a minute move like she did at 1:17, it’s easy to think that in 60 seconds you can take a handful of seats on the other boat(s) but I like that she kept it simple here by going after just one seat and calling out the guy in her boat whose seat they were targeting (and then told him when they’d got it).

In between her calling “inches” you can hear her stroke say “length!” at 4:13, which she immediately follows up with on the next call by calling for more length through the water. That’s a fairly common question that I get, how to communicate with your stroke during the race and this is a good example of how simple it really is.

University of Washington vs. California 2009 Duel

OK, so for some context watch this video of the race that was taken from the launch. Turn your volume up too and prepare yourself for the single greatest move that I think I’ve ever seen at 1:41. (TBH I’m kind of excited to hear from inside the boat how this move played out because we saw Washington do something similar several times at IRAs last year, including when they were in our race in the V4+, so … it’s nice having some insider knowledge now of how they do it.)

I really like the “lengthen and increase boat speed” call she makes out of the start at 0:40 as a reminder to not let the power fall off as the stroke rate starts to ease out into their base pace. Also saying “hold the knees” instead of something related to the slides is a good alternative; it’s a more active call than just “slow the slides” or whatever we normally say.

I like that they take their move at 650m in. Calling moves at the 500m, 1000m, etc. is fine but these moves taken at relatively unconventional spots are what gets your bow ball in front. Starting at 1:52, I’m obsessed with this chunk of calls, particularly the “get outta here!” one. I’ve looped it so many times because even without watching the video, I can feel California’s souls getting crushed and as a coxswain there are few better feelings than seeing that moment when the other crew realizes they’re about to get dropped. After you make a successful move on another crew, the next thing you have to do is watch them for the counter attack because it will happen and you don’t want to be caught off guard when it does. I like how she stays calm at 2:25 and reminds them to defend it by completing the strokes (nothing fancy, just relying on flawless execution of the basics) before calling that ten at the thousand to “end it”.

Lengthening out at 1250m is a really solid strategic move. It’s not necessarily a move to gain anything, rather it’s an internal move to get the bodies ready for the last 500m. By 1250m – the middle of the third 500 – this is probably the peak of pain before the rowers catch that second wind leading up to the sprint. Reminding them to breathe, stay long, etc. eliminates any tension that could otherwise shorten the strokes and decrease the boat speed.

At 3:55 you can hear the stroke say “They’re going!”, which is Reason #875 why stroke-coxswain communication is important. If you’re far enough ahead that you don’t have a clear view of the other boat in your peripheral vision, you’ll need to rely on your stroke seat to alert you to when the other boat starts to move on you.

Team USA Women’s 8+ 2010 World Cup III Heat

This is my favorite of these three recordings. Note how, similarly to the other two recordings, she has a very focused calm in her voice during the start. It isn’t until about 60 seconds into the race where her coxing voice really comes out.

At 4:48 when they’re approaching 750m she makes this call: “…5 more and we lengthen back out. I wanna do it by sending … now send through the back end.” Similarly to the “lengthen and increase boat speed” calls, I like this one because the objectives are clear and she’s calling for them to do it by calling on her knowledge of the stroke and by emphasizing their swing and acceleration (which if that’s something you know your crew does really well, you should incorporate that into calls like this and work the rhythm that comes from it). I also love how her voice is pretty chill at the start of this and then there’s that kick in her voice when she says “fuck yea” – the excitement there is motivating in itself but the contrast in her tone would for sure make me drop a split or two if I were rowing.

Similarly to the lengthen move at 1250m in the previous recording, I like this “breathe for 5” move that they take at 6:45 coming into the last 500m. This has always been one that I do too with my crews just as another way to get them to stay fluid and loose and refocus before we make the final push to the line. The thing to remember with calls like this (that Katelin does really well) is you have to match your tone to the intensity of your call – a call like this can’t be said in the same tone as the “we’re gonna send a fucking message to Canada” call.

Side note, one of the many amusing stories that the guys told me last year about our V8+ coxswain was how during a race he was trying to get the crew to relax and because he was getting progressively more frustrated with how the boat felt, eventually he yelled “JUST. FUCKING. RELAX!!!” which obviously accomplished absolutely nothing. Don’t do that. If you’re gonna make a call that falls under the “relax” umbrella, your tone has to be a little more subdued that it is during the more intense parts of the race.

One last thing I want to point out is the swearing, which I’ve talked about on here a few times (most recently in this post). These recordings are some more good examples of how to swear and how to make it work without sounding like a try-hard. If you’re a junior coxswain and even less so as a collegiate coxswain, very few people are ever going to actually care that you said “fuck” during a race if you use it to punctuate your calls like she does. It’s when it gets gratuitous that coaches get annoyed because it’s just unnecessary and can be borderline unsportsmanlike.

Other calls I liked:

“Hold your momentum…”

“Third 500 is crushing … base … speed!”

“We’re gonna send a fucking message to Canada!”

You can find and listen to more recordings by checking out the “Coxswain Recordings” page.

Top 20 Terms Coxswains Should Know: Check

Coxing Rowing Technique

Top 20 Terms Coxswains Should Know: Check

Previously: Rush(ing) || Body angle || Pick drill || Suspension || Skying the blade || Quarter feather || Pin || Run || Lunge || Washing Out || Missing water || Footboard 

What part of the stroke/stroke cycle does it refer to

The recovery, primarily the second half.

What does it mean/refer to

 “When a crew is on the drive, they’re moving the boat FORWARD. As soon as they tap down, get the hands away, and start coming up the slide, the momentum of the boat shifts. This is completely natural. The rowers are now moving in the OPPOSITE direction of the shell’s momentum, which is still going forward.

Related: There’s a lot of like, I don’t know how to describe this really, lurching in the boat? Because I think the girls slide forward to fast and that makes us go back instead of forward if that makes sense. how would you correct this? Thanks!

The reason the ratio of the stroke is 2:1 is because in order for the boat to continue moving forward at the same speed, the disruption in momentum by the rowers has to be minimal. It’s going to happen, but you want it to be as unnoticeable as possible. If the rowers get to the catch and fly up the slide (eliminating the ratio), it’s comparable to driving at 60mph and then SLAMMING on the brakes…then hitting the gas to get to 60mph again…then SLAMMING on the brakes. When you hit the brakes in your car, what happens to your body? You jerk forward towards the steering wheel, right? In the shell, you’re the steering wheel. When the rowers hit the brakes and then rush up the slide, the boat jerks towards you. If you watch slow-motion video (and on rare cases, live video) you can visibly see the boat STOP and then start again with every stroke. Just like starting and stopping wastes gas in your car, it does the same thing in the boat. Your rowers are WASTING their energy because on every drive they’ve basically got to kick start the boat again.”

Related: Top 20 terms coxswains should know: Rush(ing)

Other things that can cause check in the boat include overreaching at the catch (dropping the shoulders down into the catch pushes the stern of the boat down which in turn slows the run of the boat – it’s like dragging your foot on the ground while skateboarding), not keeping your body stable on the seat during the recovery (this will also mess with the set of the boat which only slows the boat down further), and not getting the bodies set before the wheels move (throwing your upper body weight forward at the last second does the opposite of minimizing the disruption in the shell’s momentum).

Relevant calls

Outside of the general calls to lengthen out the slides, control/emphasize/exaggerate the recovery, ratio shifts are the go-to call I make when I feel the boat’s momentum starting to shift.

Related: How do you call a ratio shift to control and stop the rush without lowering the SR? Is it even possible?

That is step one. Sometimes that’s all it takes to fix the problem but other times it’ll persist which means I’ll work through the stroke from the finish to the catch and make calls that hit each of the four components (finish timing, hands away, body swing, and slides) in order to smooth out the recovery and re-establish the boat’s run. (How much time I spend on this is dependent on whether or not we’re doing steady state (more time) or sprint pieces (less time) but if you’re communicating clearly with the crew then you should easily be able to parse down your calls from longer explanations of what you want (like what you’d make during steady state) to short 3-5 word calls without losing any of the meaning.)

Step two is starting at the back end of the stroke and getting the finish timing together. Calls to accelerate and hold the blades in the water (“squeeze” is my go-to here) are what I’ll start with before moving on to getting the hands to match the boat speed immediately out of the finish. From there it’s about watching the shoulders of the (wo)man in front of you, swinging from the hips, and establishing your body position before the wheels move. Once the slide starts, it’s all about maintaining a controlled float into the catch and locking on to stern pair’s rhythm.

What to look for

It’s less about what you see and more about what you feel (see the post linked below on boat feel for more on that). As I mentioned before, it’s like being in a car that’s hitting the brakes then hitting the gas then hitting the brakes again … your body’s response to that is to jerk back and forth (sometimes more violently than others, depending on how bad it is), which almost always causes a line of bruises across your low back from where you hit the back of the coxswain’s seat.

Related: Coxswain skills: Boat feel

If you also notice that your body is particularly tense – like you’re bracing yourself pretty aggressively in the boat to avoid getting thrown around – that’s another sign that you should shift your focus to what’s going on with the slides. The latter is one of the things I try to pay attention to a lot because it’s something I unconsciously do but because I try to make a lot of “keep the shoulders loose”, “stay relaxed with the upper bodies”, etc. type of calls (and shake out my own shoulders as I make them), it makes me spend a quick second checking what my own body is doing. From there if I recognize that my legs, core, and shoulders are really tense, I most likely need to pay attention to the slides and run for a stroke or two to see if a ratio shift or other check-related call is necessary.

Communication with your stroke seat is also important because sometimes they can feel things that are there but at that stage are too subtle for us to notice. I always talk with my stroke between pieces and ask how that piece felt, was there anything happening with the slides that you felt that I didn’t notice, etc. and if they say “yea, when we shifted from the 26 to the 30 I was getting pushed up the slide a bit” then I know to tune in a bit more to the recovery speeds after we make a shift in the rates on the next piece.

The thing with check, rush, ratio, etc. is that we tend to only notice it when it’s bad enough to be noticed … so on a scale from 1-10, we probably only feel it ourselves when it’s at a 5 or higher (depending on your level of experience – less experienced coxswains might not pick up on it until it’s at an 8 or 9 and they’re getting whipped around like a rag doll). This is why I talk to my stroke seat a lot because I know that the rowers are going to feel it when it’s at a 1-5 and having them point out to me that it’s there, even if it’s subtle, gets me to tune into it so I can make the calls early enough that it prevents it from getting worse.

If you’re riding in the launch, pick a rower and watch their body in relation to something stationary on land, like a tree or something. You’ll be able to see the boat running under them while their body stays “fixed” (as discussed in the post linked below). Assuming the ratio is on point and there’s no check occurring you should see minimal movement of the boat/rowers back towards the coxswain at the catch. If the boat is getting checked down for whatever reason (99.9% of the time because of rush) then you’ll see the rowers move in front of whatever object you’re pairing them with on land.

Related: I’m the senior girl’s cox for my school club and my crew is really struggling with having a slow recovery then accelerating to the finish and putting in pressure. When I call to go slow up the slide they might slow down 1 or 2 points or not even at all. And the pressure dies when the rating slows. Then the rating goes up when I call pressure. Do you have any ideas about how I can help them get into a slow steady rhythm but still put in pressure?

Effect(s) on the boat

Check = loss of speed because … physics.

Related posts/questions

There’s a lot of like, I don’t know how to describe this really, lurching in the boat? Because I think the girls slide forward to fast and that makes us go back instead of forward if that makes sense. how would you correct this? Thanks!

What checks the boats run? Recently in our octo the run of the boat is checked but I don’t know how to prevent it and what to call to make it better. Thanks love this blog, so helpful! 🙂

Hi, I never know what it means when someone asks me what the boat “feels” like. Like the rush for example. I’m not sure what that feels like vs. a boat with no rush. Just in general, I’m not sure how to gauge whether a piece felt good or bad. I feel like the only things I can see are blade height, square up timing, catch timing, and if bodies are moving together, and I can tell if the boat was really moving and if there was power. But what else should I be aware of?

So my team has a regatta next weekend and we have only rowed at all 8s like 3 three times since winter training. When we do there is A LOT of check and the boat is really not set. As the coxswain, is there anything I can say to fix this and help get my boat ready for Sunday? Thanks!

To see all the posts in this series, check out the “top 20 terms” tag.

Image via // @radcliffecrew

Top 20 Terms Coxswains Should Know: Footboard

Coxing Rowing Technique

Top 20 Terms Coxswains Should Know: Footboard

Previously: Rush(ing) || Body angle || Pick drill || Suspension || Skying the blade || Quarter feather || Pin || Run || Lunge || Washing Out || Missing water

What part of the stroke/stroke cycle does it refer to

The footboard itself obviously isn’t part of the stroke but it plays an important role on the recovery, at the catch, and at the finish.

What does it mean/refer to

The footboard, also known as the foot stretchers or just “stretchers”, is generally considered to fall under the “rigging” umbrella since it’s an adjustable part of the shell’s structure. (You can read more on its relation to rigging in the posts I’ve linked down below.)

Relevant calls

The calls you make here aren’t going to be strictly about the footboard, rather they’re going to be with how the body interacts with it at certain points throughout the stroke.

Recovery: “Stay light on the feet”, “No weight on the legs/stretchers on the way up…”, etc.

Second half of the recovery: “Transfer the weight to the toes…”

Catch/drive: “Stomp…”, “Legs…“, “Kick…”, “Drive…“, “Push…”, etc.

Finish: “Maintain connection through the feet…”

What to look for

As the coxswain, the things you notice about the footboard are most likely going to come in the form of something being off with the rower’s catch and finish angles. If they’re too sharp or too shallow then you’ll want to ask them if they’re getting to full compression (or if they’re over-compressing if the angle is particularly sharp) and then have them make an adjustment towards the bow or stern as necessary from there. Same goes for if/when you hear a lot of banging with the slides at the catch or finish.

In the 13 years I’ve been coxing I think I’ve only seen my coaches change the angle of the foot stretchers maybe two or three times, all to accommodate rowers who had very poor flexibility. It’s not something you’ll encounter that often but when you do it’s good to have a general idea of where they should be and how each positioning can effect the rower’s stroke. The general range is 38-42 degrees, with a shallower angle allowing the rower to have better compression and a steeper angle allowing you to drive with more force (although you’ll be sacrificing some of your length since you won’t be able to get to full compression as easily). If you have the chance to watch or help your coach rig the boats, talk to them about the placement of the stretchers and the angle at which they’re set.

Effect(s) on the boat

From a rigging perspective, if the footboard’s angle is too steep or too shallow then the angles of your catch and finish will be impacted. You might also need to move them towards either the stern or bow of the boat if you find yourself hitting the front stops (move to bow) or the back stops (move to stern).

From a rowing perspective, if you’re losing connection with the stretchers at the finish or not transferring your weight properly at the front end then you’ll be limiting the power of your stroke.

Related posts/questions

An Introduction to Rigging, pt. 4: Rigger Height and Work Through

Adjusting your foot stretchers

“How to set your footboards…” via USRowing

The other day our coach had all of us move our foot stretchers all the way forward on the tracks. I was wondering what the benefit of doing this is?

I have been rowing bow (port) in our starboard stroked bow-loader four boat. When ever we start to row and get to the drive part of the stroke my left ankle keeps cramping up and I was wondering if you had any way to stop this from happening?

Hey Kayleigh, I was hoping you could lend some advice on spacers, the correct positioning of your body in relation to the pin, and how to change these things either before you are out on the water or while you are out on the water. I was told that when in doubt to take a spacer off… is that the rule of thumb? It is different due to the type/make of the boat? Any help would be much appreciated. Thanks!

Question about the foot plates on the ergs – what number do you find it’s best to keep them on? Is there a standard it’s “supposed to” be at or is it best for each girl to change them for herself? What do those numbers even mean?

 To see all the posts in this series, check out the “top 20 terms” tag.

Image via // @reginaems
Defining the role of the coxswain: Motivation

Coxing Teammates & Coaches

Defining the role of the coxswain: Motivation

Despite not being that high on the list of things you’re responsible for doing, helping to motivate your crew is still an important part of your job as a coxswain.

Related: What do coaches look for in a coxswain + Motivation (tag)

I’ve talked a lot about motivation in the past and there’s definitely no shortage of inspiration in the quotes, videos, and recordings I post but if you want something simpler to go off of, here are the two most basic things you can do to motivate your teammates.

Lead by example

Be present because even on days when practice is boring, you can’t be. If you’re motivated by something, whether it’s a personal goal or a team goal, bring that energy to practice and on the water. Your interactions with the rowers, coxswains, and coaches, your engagement during team meetings, etc. are all things that might seem inconsequential but can actually be strong motivating factors for the people around you.

Know what your teammates want

If you’ve asked me any version of the question “what’s a good call to make to motivate my crew”, you’ll know that my first answer is ALWAYS to talk to your teammates. Everybody is driven by different things which means you have to pay attention and get to know the people on your team so you know where their motivation lies. Remember, your job isn’t necessarily to give them motivation, it’s to draw out what’s already there.

Both of these should be considered “non-negotiable” – you should be doing them every single day without thinking about it and without being asked. Given that most of us are in the midst of winter training and are likely to be stuck inside for at least another six weeks, doing both of these is a good way to start setting yourself apart from the other coxswains.

Image via // @spsbc_17
Top 20 Terms Coxswains Should Know: Missing Water

Coxing Rowing Technique

Top 20 Terms Coxswains Should Know: Missing Water

Previously: Rush(ing) || Body angle || Pick drill || Suspension || Skying the blade || Quarter feather || Pin || Run || Lunge || Washing Out

What part of the stroke/stroke cycle does it refer to

The catch.

What does it mean/refer to

Missing water (also known as “rowing it in”) is what happens when your blade isn’t in the water at the end of the recovery/top of the catch. What happens instead is you start with the blade in the air and place it in the water as you start the leg drive. Moving backwards on the slides without your blade in the water causes you to have a shorter and less powerful stroke as a result of missing out on the power generated by your legs in the first few inches of the drive.

Relevant calls

“Get the blade wet before you start the leg drive…”

“Direct to the water…”

“Bodies set early, hands up at the catch…”

“Back it in…”, “Get that V-splash…” I use both of these a lot, particularly when we’re rowing in good water and there’s no excuses for sloppy handle heights or indirect catches.

“Hook, send…” is another call I make a lot because it gives a visual reference for what the catch should look like (think of a fish hook) – smooth and continuous. Usually the second half of the call will reference whatever else we’ve been working on during practice – for example, last week when I was coxing our eight in Florida I said “hook, send” and “hook, squeeze” a lot since we’d been working on both maximizing the run of the boat and completing the strokes during our drill sessions.

What to look for

Front splash at the catch is the most obvious sign from the coxswain’s seat that someone is missing water at the catch. Ideally at the catch you should see some V-splash, which means there’s water moving in both directions (with just slightly more moving towards the bow than the stern) but at the very least you should be seeing some backsplash. Seeing neither is an indication that the rower isn’t getting their blade in before they start the drive.

Another thing to watch for is blade height throughout the recovery. If you see someone start skying their blade as they come into the front end then they’re almost certainly going to miss water at the start of the stroke.

Related: Top 20 terms coxswains should know: Skying the blade

Effect(s) on the boat

Like just about everything else, the biggest effect on the boat will be in the form of balance. If someone (or one side) is rowing it in at the catch then the boat won’t be able to immediately stabilize, resulting in it falling over to whichever side is missing water.

Related posts/questions

Hi there! I have the unfortunate issue of missing water/not getting my oar completely buried before my drive. My knees go down faster than the rest of my boat, and it’s hard on the timing especially when I’m stroking. Why is this happening? I know how it should feel like on my legs if I get the full drive (it’s more pressure, it’s like how strokes feel on an erg), but my hands don’t seem to get it. What are some things I can do? Thank you in advance.

Hey! I cox a HS women’s bow loader 4+ and after looking over some footage from our past regattas, my coach noticed that many rowers are “missing water” and not getting the oars enough behind them enough at the catch to produce a maximum length and power stroke every time. She asked me to try to make calls and to focus on things that will help get the length behind them, and also to have them think about rotating out towards their rigger at the catch. Would you be able to clear what she means up for me, and possibly demonstrate the way something like this would be called? Thanks!

Can you explain the term “rowing it in”?

To see all the posts in this series, check out the “top 20 terms” tag.

Image via // @kiwi_eight
Top 20 Terms Coxswains Should Know: Washing Out

Coxing Rowing Technique

Top 20 Terms Coxswains Should Know: Washing Out

Previously: Rush(ing) || Body angle || Pick drill || Suspension || Skying the blade || Quarter feather || Pin || Run || Lunge

What part of the stroke/stroke cycle does it refer to

The finish.

What does it mean/refer to

Washing out happens when instead of drawing through horizontally at the finish, you instead pull/feather down into the lap (which in itself can also be a result of a loss of suspension). This results in the blade popping out of the water as you finish the stroke with the arms.

Related: Top 20 terms coxswains should know: Suspension

Relevant calls

A lot of these are fresh in my head because when I was coxing in Cocoa Beach, I found myself making a lot of calls for holding the blades in (which we’d been working on), supporting your side, etc. We did some short pieces and there were occasionally stretches where the set was pretty awful but as soon as I’d make one (or several) of these calls, the boat would balance right up and we’d start getting some good run again. About 90% of the time we were down to port so the first call I’d always make would be for the ports to lift the hands and then if that didn’t change anything I’d call for starboards to lower theirs. From there I’d get more specific based on what I was seeing/feeling.

“Support your side…”

“Engage the lats, draw the handle through to your target…”

“Suspend through…”

“Hold the finishes…”

“Elbows up at the finish…”, “Consistency with the hands…”

“Hook, squeeze…” The relevant part of this call is the “squeeze”, which is supposed to remind the rowers to accelerate the blade and keep it buried all the way through to the finish.

Understanding suspension so you can communicate the relationship between a loss of suspension and washing out is also important. The key to speed in any boat is hanging on the handle and maintaining that suspension all the way through to the end of the stroke. The blade stays locked into the water until suspension is no longer being maintained and that moment when pressure is cut off is when the handle is able to come down and away smoothly. Every part of the stroke has to flow dynamically into the next without letting the body weight settle on to the seat. When making calls for washing out, make sure you’re not just reminding the rowers to pull into their targets but to also hang off the handle and stay light on the seats.

What to look for

If you notice this happening early on in practice or when you’re doing long-and-low steady state, start by telling the rowers to look out at their blades and follow its path through the water to ensure it’s staying buried all the way through the finish. Have them do this for 3-5 strokes and then call them back to eyes forward. It’s easy to get transfixed by the blade and start going through the motions so let them watch them for a few strokes before getting the crew refocused.

White water at the finish is a tell-tale sign of someone washing out. As a result of the blade coming out feathered or at an angle rather than fully squared, the extra effort being exerted during the draw through throws water backwards (towards the coxswain) rather than propelling the boat forward (towards bow) and creates that distinctive “whoosh”-ing sound.

From the coxswain’s seat it can be tough to see this but if you’re in the launch, look at the elbow and wrist position at the finish. The outside elbow should be up and out and the outside wrist should be flat, essentially acting as an extension of the oar handle. If the lats are engaged and you’re drawing straight through to your low ribs then this positioning of the arms should happen naturally. Having the elbows too close to the body, feathering down into your lap, elbows pointed down towards the back of your seat, etc. will all result in washing out.

Effect(s) on the boat

The most obvious effect is that it causes problems with the set. If you’re on port then the boat is going to fall towards your side on the drive and then dump to starboard on the recovery (which, to say the least, is super annoying). The lack of connection and suspension that leads to washing out also leads to a loss of power, thus making each stroke less efficient and the boat to experience less run per stroke.

Related posts/questions

(Scroll down to #5.) Hi! My coxing has gotten to the point where I can see the technical problems in my rowers, but sometimes I’m not sure how to call a correction on them. For instance, I know if someone is skying at the catch I can call the boat to focus on direct catches and “hands up at the catch” and things like that for stability…but there are others I’m less sure about. Would you please touch on good ways (positive reinforcement, they hate the word “no” in the boat) to call for the following problems in a rower?

I rowed for three seasons and I have been asked to help cox a crew for a race thing in the beginning of September. A lot of the people haven’t rowed much/before and we are allowed 12 on water sessions before the race. The coach has said that I need to coach more since I can sometimes see more from the coxswain seat than they can see from the coach’s boat, except I’m not experienced enough with coxing to know what to look for other than obvious timing issues etc. Do you have any tips?

The Kiwi pair does this really incredible thing where they take their oars out of the water SO FREAKING CLEANLY and I am having such a hard time trying to do it, I can never tell if I’m throwing water around when I feather my blade and IDK if you know what I’m getting at but yeah help?

To see all the posts in this series, check out the “top 20 terms” tag.

Coxing Video of the Week

Video of the Week: Katelin Snyder’s presentation at “Rowing Talks”

I relate to this so hard. Both as a coxswain and a coach, everything she said is pretty much exactly how I’ve felt at each stage of the game over the last thirteen years. If you’re looking for something to do in the hotel on your training trip (which is what I did) or at the boathouse while your team is erging, I’d definitely recommend watching this with the other coxswains on your team.

Related: Katelin Snyder + winter training

Once you’re done with this one, another video you can watch that features Katelin is the one linked above, which is one row2k did on her experiences with winter training over the years. There’s some overlap when it comes to what coxswains could/should do but this one’s only 10 minutes long so it’s worth watching all the way through and picking up some new ideas.